Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000007353
New product
High gain audio amplifier based on the LM386 integrated circuit.
See Description for more details about the product.
Add to cart now!
274 Item Items
Warning: Last items in stock!
Availability date:
1. Power up the audio amplifier.
The module is powered with a voltage between 5 V and 12 V. The supply pins are marked with VCC and GND. On the module are marked 2 pins with GND, but it does not matter which pin you connect the table.
2. Connect a speaker to the mode.
On the opposite side of the module, there are two screw terminals useful for connecting a speaker with a 8Ω impedance.
3. Connect an audio signal source.
The audio input is made through the pins marked with IN and GND. If the audio signal and the power supply come from a common source (for example: an Arduino development board), you need to connect a single mesh wire (GND).
The module connects to the development board:
This 2-wire DC voltmeter panel is a highly...
10,32 lei
5 mm Yellow LED with Clear Lens
0,29 lei
2.5 mm to 3.5 mm Audio Adapter Cable See...
4,99 lei
CT817C See description for more details...
0,99 lei
1.65" mini-clips. Mini-hooks provide a firm,...
1,49 lei
Colored Cover for Potentiometer (Black and...
0,99 lei
PCI Express to M.2 NGFF 1 x NVME Expansion Card
34,99 lei
10000uF to 35 V Electrolytic Capacitor 105o...
4,99 lei
Wiring Test 120 x 170 mm
7,99 lei
Raspberry Pi Zero/W case useful for protecting...
21,41 lei