Sale! FormFutura EasyFil PLA Filament - Light Green, 2.85 mm, 50 g View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

FormFutura EasyFil PLA Filament - Light Green, 2.85 mm, 50 g

8718924473528

New product

EasyFil PLA is a high-end "easy to use" impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. 


See Description for more details about the product.

Don't delay, buy today. Add to cart now!

More details

This product is no longer in stock

11,22 lei
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

-8,50 lei

19,72 lei tax incl.

Add to wishlist

More info

Description

EasyFil PLA is a high-end "easy to use" impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.


Unique features

  • Very easy to print
    • Warp-free printing and no deformation after cooling
    • Improved flowing behaviour and inter-layer adhesion
    • Good first layer adhesion to several (un)heated print surfaces
  • Slightly softer than standard PLA resulting in improved strength and impact resistance
  • Almost odourless processing/printing
  • Biodegradable
  • Wide variety of vivid opaque colors


General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 200 - 230oC Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 - 60oC Fan speed: 50-100% Experience level: Beginner
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.


Filament length

ρ: 1.24 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 16.8m ± 251m ± 771m ± 1509m ± 2682m
Ø 2.85mm ± 6.3m ± 95m ± 291m ± 569m ± 1011m

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

• RoHS directive 2011/65/EC

• REACH directive 1907/2006/EC

* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.


EasyFilTM PLA is an "easy to use" high-end PLA (Poly-Lactic Acid ) type of 3D printer filament. With retaining the typical PLA features, EasyFilTM PLA is slightly modified with an impact modifier, making the filament tougher, less rigid, slightly softer and therefore "easy to print" at relatively low temperatures. By being slightly modified, EasyFilTM PLA is much longer preservable than normal PLA. Another great advantage of EasyFilTM PLA - compared to regular PLA - is EasyFilTM's low shrinkage factor, which makes EasyFilTM PLA nearly warp-free and therefore EasyFilTM PLA will not deform after cooling.

PropertiesTypical valueTest MethodTest condition
Physical
Specific gravity 1.24 g/cc  ASTM D1505 -
Melt flow rate 6.0 g/10min - -
Water absorption - - -
Moisture absorption - - -
Mechanical
Impact strength 7.5 KJ/m2 - -
Tensile strength 110 Mpa (MD) ASTM D882 -
Tensile modulus 3310 Mpa (MD) ASTM D882 -
Elongation at break 160% (MD) ASTM D882 -
Flexural strength ± 55.2 Mpa - -
Flexural modulus ± 2392.5 Mpa - -
Hardness - - -
Thermal
Print temperature ± 180 - 220oC - -
Melting temperature ± 210 ± 10oC - -
Viscat softening temp. ± 60oC ISO 306 -
Optical
Haze 2.1% ASTM D1003 -
Transmittance - - -
Gloss 90 ASTM D1003  Gloss, 20o


Don't delay, buy today.


Add to cart now!

Reviews

Write a review

FormFutura EasyFil PLA Filament - Light Green, 2.85 mm, 50 g

FormFutura EasyFil PLA Filament - Light Green, 2.85 mm, 50 g

EasyFil PLA is a high-end "easy to use" impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. 


See Description for more details about the product.

Don't delay, buy today. Add to cart now!

Customers who bought this product also bought:

Download