This is why you should use EasyPrint!
3 Item Items
Warning: Last items in stock!
EasyPrint VALUE pack contains 4 x 500-gram spools.
Clear, Transparent Rose, Transparent Light Blue, Transparent Green
Spool fully compatible with all Flashforge printers fits inside printers like Finder, Dreamer, etc... Adapter included so you can change the spool hub diameter.
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility, and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent, you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness, and toughness than regular PET.
EasyPrint PETG is the perfect addition for your filament collection. It has many unique features which makes it one of the most versatile filaments in our portfolio. You can make beautiful prints in "vase mode" with more than 90% light transmission and almost no haze. EasyPrint PETG doesn´t release any toxic or irritating fumes when printing.
EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ˚C
EasyPrint PETG sticks on BuildTak, PEI sheet and glass plate coated with adhesive spray or glue stick.
On every spool of EasyPrint, you will have a perfect spooled filament with a weight of 500grams. When you compare price and performance EasyPrint is hard to beat!
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
|Density||ASTM D1505||1.27 g/cm3|
|Water Absorbation (24-hour immersion)||ASTM D570||0.2 %|
|Rockwell hardness||ASTM D785||116 R-scale|
|Shrinkage||ASTM D955||0.2 - 0.5 %|
|Tensile strength @ Yield||ASTM D638||53 MPa|
|Tensile strength @ Break||ASTM D638||26 MPa|
|Elongation @ Yield||ASTM D638||5.0 %|
|Elongation @ Break||ASTM D638||70 %|
|Flexural Strenght||ASTM D790||80 MPa|
|Flexural Modulus||ASTM D790||2150 MPa|
|Izod Impact Strenght (Notched @ 23°(73°F)||ASTM D256||90 J/m|
|Heat Distortion @ 0.455 Mpa||ASTM D1003||74° C|
|Vicat Softening Temperature||ASTM D1525||83° C|
|ASTM D1003||90 %|
TMC2100 Stepper Motor Driver v1.3 with heatsink
This proximity E3D v5 3D printer head (0.4 mm...
Dual-sided SOP8/SOIC8/SO8/TSSOP8/SSOP8 SMD to...
The breadboard power supply takes power from...
This motor driver shield is based on L293D...