Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added.
See description for more details about the product.
Add to cart now!
1 Item Items
Warning: Last items in stock!
This Galaxy PLA Sample Pack contains the following samples (50g each):
Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminum-flakes added. The high added aluminum-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle colour shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.
|Nozzle size: ≥ 0.15mm||Layer height: > 0.1mm||Flow rate: ± 100%|
|Print temp: ± 210 - 235° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 - 60° C||Fan speed: 50-100%||Printing surface: Blue Tape / Glass|
|Enclosed printer needed: No||Heated Build Chamber: No||Experience level: Beginner|
* Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.24 g/cc||50 gr coil||0.75 Kg spool|
|Ø 1.75mm||± 16.8m||± 251m|
|Ø 2.85mm||± 6.3m||± 95m|
This filament is compliant with the below-listed directives and regulations.
* This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.