Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
SF11977
New product
This is a breakout board for InvenSense’s ITG-3200, a groundbreaking triple-axis, digital output MEMS gyroscope.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
This is a breakout board for InvenSense’s ITG-3200, a groundbreaking triple-axis, digital output MEMS gyroscope. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface. Additional features include an embedded temperature sensor and a 2% accurate internal oscillator.
The ITG-3200 can be powered at anywhere between 2.1 and 3.6V. For power supply flexibility, the ITG-3200 has a separate VLOGIC reference pin (labeled VIO), in addition to its analog supply pin (VDD) which sets the logic levels of its serial interface. The VLOGIC voltage may be anywhere from 1.71V min to VDD max. For general use, VLOGIC can be tied to VCC. The normal operating current of the sensor is just 6.5mA.
Communication with the ITG-3200 is achieved over a two-wire (I2C) interface. The sensor also features an interrupt output and an optional clock input. A jumper on the top of the board allows you to easily select the I2C address, by pulling the AD0 pin to either VCC or GND; the board is shipped with this jumper tied to VCC. If you don’t plan on using the CLKIN pin, you can short the jumper on the bottom of the board to tie it to GND.
This breakout board is shipped as shown in the images. Note that there are two unpopulated resistors on the I2C lines, these can be added later by the customer if desired.
This sensor is the enhanced version of the...
14,99 lei
Ideal wires for making connections for...
3,99 lei
9-Axis Sensor Module MPU9250 consisting of...
46,99 lei
The HC-SR04 ultrasonic sensor is one of the...
6,49 lei
This 5-pin female wire jumper can be used to...
1,49 lei
Those jumpers are ideal to be used for...
7,99 lei
LED Ring with 8 Addressable WS2812 RGB LEDs
14,99 lei
4 RGB LED Module
6,35 lei
Colored mini breadboard, ideal for small...
2,37 lei
4p Cable 70 cm See description for more...
2,99 lei