2 Item Items
Warning: Last items in stock!
The Plusivo Pi 4 Super Starter kit is ideal for electronics enthusiasts and very useful for getting started with the Raspberry Pi development environment. In addition, thanks to the guide included for this kit, any enthusiast can start creating simple, or even complex projects, even if he has not used a development board before. For most sensors and components in the kit, detailed lessons and commented codes are available, so working with different sensors will become easier. This is a very powerful board that can replace even your home computer or laptop, having a quad core CPU, 1 GB of RAM, gigabit Ethernet and AC wireless and it is capable of dual 4k output.
This mini computer can also host a web server and has internal memory of 32 GB where you can store files, web pages and others. Thus, a fairly simple project can take a whole new direction. For example, you can create a weather monitoring station and the information can be displayed in a web page, a phone app or you can store it in the internal memory at a certain interval of time.
Another project detailed in the guide is building a piano. You have the design of a piano in a web page and when a clape is pressed, on the buzzer you will hear the sound for a note. These are simple examples of what the Raspberry Pi 4 Model B can do.
A basic beginner kit with all the necessary components to jumpstart your interest in learning and making your own projects.
A complete starter kit that includes the Raspberry Pi 4 Model B mini computer.
A premium kit with detailed instructions in a high quality storage box.
All you want, all you need and all you desire with the Plusivo Pi 4 Super Starter Kit.
• Raspberry Pi 4 Model B with 1 GB RAM;
• 32 GB sd card with NOOBs;
• 1 m HDMI - microHDMI cable;
• 5V, 3A USB Type C power supply;
• 5 5 mm blue LEDs;
• 5 5 mm red LEDs;
• 5 5 mm yellow LEDs;
• 5 5 mm green LEDs;
• 5 5 mm white LEDs;
• 5 mm RGB LED with common cathode;
• 11 sets of resistors with 10 pieces/set:
• 10 Ω;
• 100 Ω;
• 150 Ω;
• 220 Ω;
• 330 Ω;
• 1 kΩ;
• 2 kΩ;
• 5.1 kΩ;
• 10 kΩ;
• 100 kΩ;
• 1 MΩ;
• MPU6050 Accelerometer and Gyroscope;
• Breadboard 830p;
• L293D motor driver;
• Set of 65 male-male jumper wires for breadboard;
• 100 nF ceramic capacitor;
• HC-SR04+ ultrasonic sensor;
• 5 push buttons;
• SG90 90° servomotor;
• 4 NPN 2N2222 transistors;
• DHT11 Temperature and humidity sensor compatible with 3.3 V;
• 2 1N4007 diodes;
• 2 74HC595 shift registers;
• 4 Digit 7 Segment display with common cathode;
• Red Ledbar;
• DC Motor;
• 5 V relay;
• Set of 10 20 cm male-female wires;
• Passive buzzer.
This 10 A PWM Driver Module reverse polarity...
This module is based on DHT11, a...
HC-SR04 ultrasonic sensor
The AT24C256 EEPROM module can be used to store...
0.56'' Red DC Panel Voltmeter with 3 Wires (0 -...
LCD and Keypad Shield for Arduino
This is a high precision servo motor for your...
This mounting bracket is suitable for your...