Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000071606
New product
SAKATA 3D PETG filament is suitable for all consumer-grade 3D FDM/FFF printers.
• High resolution, premium filament.
• Easy to mould, print and engrave.
• High rigidity and low contraction rate.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
SAKATA 3D PETG filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament shows high transparency, good chemical resistance and toughness, excellent mechanical properties, outstanding printability, and low haze and odor. Ideal for household and industrial applications. Made in Spain by POLIMERSIA GLOBAL S.L.
Filament Specifications | Value | Unit |
---|---|---|
Diameter | 1.75 ± 0.05 / 2.85 ± 0.05 | mm |
Max. roundness deviation | 0.05 | mm |
Net weight | 1,000 | g |
Physical Properties | Standard | Value | Unit |
---|---|---|---|
Specific gravity | ASTM D792 | 1.27 | g/cm3 |
Hardness | ASTM D785 | 110 | R scale |
Mechanical Properties | Standard | Value | Unit |
---|---|---|---|
Tensile yield strength | ASTM D638 | 50 | MPa |
Tensile strength at break | ASTM D638 | 28 | MPa |
Elongation at break | ASTM D638 | 140 | % |
Flexural strength | ASTM D790 | 73 | MPa |
Flexural modulus | ASTM D790 | 2,110 | MPa |
Notched Izod impact | ASTM D256 | 100 | J/m |
Impact resistance (puncture) | ASTM D3763 | 33 | J |
Thermal Properties | Standard | Value | Unit |
---|---|---|---|
Heat distortion temperature | ASTM D648 | 64-70 | ºC |
Vicat Softening temperature | ASTM D1525 | 85 | ºC |
Electrical Properties | Standard | Value | Unit |
---|---|---|---|
Dielectric strength | ASTM D149 | 16 | kV/mm |
Dielectric constant | ASTM D150 | 2.4-2.6 | -- |
Print Settings | Value | Unit |
---|---|---|
Nozzle temp. | 225-245 | ºC |
Bed temp. | > 60 | ºC |
Bed modification | - | -- |
Fan speed | 20 | % |
Layer height | 0.1-0.3 | mm |
Print speed | Up to 80 | mm/s |
Note: A flow reduction of 4-6 % is strongly recommended since the high density of the material.
M4x20 mm Hexagonal Head Screw See description...
0,34 lei
PCB Antenna GSM/GPRS/3G with IPEX to SMA...
4,99 lei
This product contains a 5 V stepper motor and a...
16,97 lei
High resolution, premium filament. Easy to...
115,00 lei
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
6,99 lei
This is a set of 5 mm infrared LED with a...
0,99 lei
This shield is an extension board for the...
23,99 lei
This mini servo motor is designed for radio...
13,99 lei
Cable for Hard Disk - 90 Angle - 31cm - Red...
1,99 lei
Double Plated Wiring (100 x 160 mm)
14,99 lei