Buttery, creamy and super smooth. This is our base material for all of our PLA/PHA filaments. It’s a great neutral color which is just a slight bit translucent, which helps hide the layer definition. If you’re into painting 3d prints then we would recommend this material.
4 Item Items
Warning: Last items in stock!
Colorfabb developed its own unique blend of PLA/PHA which results in a tougher and less brittle PLA 3d printing filament. PHA (polyhydroxyalkanoate) is like PLA a bio-polyester, so our unique blend is still 100% biodegradable. This material is available in a huge variety of colors, take a look in our PLA/PHA portfolio.
Since colorFabb develops and produces their own filaments we have a lot of know-how about our materials. Neutral but definitely not boring, our standard white is one of those essential filaments for every maker out there.
Here you’ll find material specifications that will help you decide which material is best for your project.
|Melting temperature||> 155||°C||ISO 3146|
|Vicat A softening temperature||n/a||°C||ISO 306|
|Heat distortion temperature HDT B||n/a||°C||ISO 75|
|Melt volume rate (190°C/2.16kg)||n/a||cm³/10min||ISO 1133|
|Melt flow rate (190°C/2.16kg)||3.0 - 5.0||g/10min||ISO 1133|
|Modulus of elasticity||2960||MPa||ISO 527|
|Tensile strength||61.5||MPa||ISO 527|
|Tensile strain at tensile strength||5.3||%||ISO 527|
|Tensile stress at break||38||MPa||ISO 527|
|Tensile strain at break||10.5||%||ISO 527|
|Flexural strain at break||no break||%||ISO 178|
|Flexural modulus||3295||MPa||ISO 178|
|Flexural stress at 3.5 % strain||88.8||MPa||ISO 178|
|Notched impact strength (Charpy), RT||2.8||kJ/m²||ISO 179-1/1 eA|
|Impact Strength (Charpy), RT||30.8||kJ/m²||ISO 179-1/1 eU|
|Bulk density||n/a||kg/m³||ISO 60|
*The values listed have been established on standardized test specimens at standard temperature and humidity conditions. Under certain conditions, the properties can be influenced to a significant extent by the processing conditions.
**Recommended, but not strictly necessary.