This tone of green reminds of the beautiful luscious dark green leaves that grow on trees. It’s almost as if this filament was made of leaves. Less bright than our Intense Green but just as pretty to look at!
3 Item Items
Warning: Last items in stock!
Colorfabb developed its own unique blend of PLA/PHA which results in a tougher and less brittle PLA 3d printing filament. PHA (polyhydroxyalkanoate) is like PLA a bio-polyester, so our unique blend is still 100% biodegradable. This material is available in a huge variety of colors, take a look in our PLA/PHA portfolio.
Since colorFabb develops and produces their own filaments we have a lot of know-how about our materials. Neutral but definitely not boring, our standard white is one of those essential filaments for every maker out there.
Here you’ll find material specifications that will help you decide which material is best for your project.
|Melting temperature||> 155||°C||ISO 3146|
|Vicat A softening temperature||n/a||°C||ISO 306|
|Heat distortion temperature HDT B||n/a||°C||ISO 75|
|Melt volume rate (190°C/2.16kg)||n/a||cm³/10min||ISO 1133|
|Melt flow rate (190°C/2.16kg)||3.0 - 5.0||g/10min||ISO 1133|
|Modulus of elasticity||2960||MPa||ISO 527|
|Tensile strength||61.5||MPa||ISO 527|
|Tensile strain at tensile strength||5.3||%||ISO 527|
|Tensile stress at break||38||MPa||ISO 527|
|Tensile strain at break||10.5||%||ISO 527|
|Flexural strain at break||no break||%||ISO 178|
|Flexural modulus||3295||MPa||ISO 178|
|Flexural stress at 3.5 % strain||88.8||MPa||ISO 178|
|Notched impact strength (Charpy), RT||2.8||kJ/m²||ISO 179-1/1 eA|
|Impact Strength (Charpy), RT||30.8||kJ/m²||ISO 179-1/1 eU|
|Bulk density||n/a||kg/m³||ISO 60|
*The values listed have been established on standardized test specimens at standard temperature and humidity conditions. Under certain conditions, the properties can be influenced to a significant extent by the processing conditions.
**Recommended, but not strictly necessary.
To make sure that you can use your electronic...
Neodymium Block Magnet 20x10x5 Thick N38H See...
2 mm Hex Wrench (short)
Cynel Solder 100 g 1 mm
PrimaSELECTFlex is a new type of Thermoplastic...
German Standard Power Adapter
Neodymium Block Magnet 10x10x4 Thick N38
Neodymium Block Magnet 7x7x3 Thick N38