Buttery, creamy and super smooth. This is our base material for all of our PLA/PHA filaments. It’s a great neutral color which is just a slight bit translucent, which helps hide the layer definition. If you’re into painting 3d prints then we would recommend this material.
4 Item Items
Warning: Last items in stock!
Here you’ll find material specifications that will help you decide which material is best for your project.
|Max. roundness deviation||mm||0.05|
|Modulus of elasticity||2960||MPa||ISO 527|
|Tensile strength||61.5||MPa||ISO 527|
|Tensile strain at break||10.5||%||ISO 527|
|Flexural modulus||3295||MPa||ISO 178|
|Melt flow rate(at 190°C)||3-5||g/10 min|
|Recommended printing speed||40-100||mm/s|
*The values listed have been established on standardized test specimens at standard temperature and humidity conditions. Under certain conditions the properties can be influenced to a significant extent by the processing conditions.
**Recommended, but not strictly necessary.