Site-ul nostru foloseste cookie-uri pentru a oferi utilizatorilor o experienta mai buna și vă recomandăm să acceptați utilizarea cookie-urilor pentru a putea beneficia de toate funcționalitățile site-ului.
0104110000087829
Produs nou
See description for more details about the product.
Add to cart now!
16 bucata in stoc bucati in stoc
Ultimele bucăți în stoc
Dată reaprovizionare:
The TDA7377 is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantees the highest possible power performances with an extremely reduced component count. The on-board clip detector simplifies gain compression operation. The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car.
Connect to speakers:
Connect the two wires of the speakers to the audio output port of the power amplifier, the left channel speaker is connected to the LOUT port of the amplifier and the right channel speaker is connected to the ROUT port, the positive connects to “+”, the negative connects to “-“.
Connect to sound source:
Use an audio cable with an end of 3.5mm stereo headphone plug and plugin 3.5 stereo headphone jack of the amplifier. The other end of the audio cable is connected to the audio source (such as computers, mobile phones, MP3, DVD).
Connecting to the power supply:
Connect to the adapter of power supply:
Use the power supply in which the output is above DC12V3A. Connect the output cable of the adapter to the 12V port of the power amplifier board. The positive connects to “+” of the port while the negative connects to “-“.
Connect voltage converter:
Use the voltage converter in which the output is above AC12V3A. Connect the two output cables of the converter to the 12V port of the power amplifier board. Because the output of the converter is alternating current, it is not positive or negative.
Play music:
Plugin the power, the blue power indicator will light up which means that the power amplifier board starts working. You can adjust the volume knob according to their own preferences.
1 x TDA7377 DC 12V 35W Dual Channel Noiseless High Power Amplifier Board
Placa PCB pentru prototipare 9x15cm pas de 2.54 mm
$1.20
Suport pentru 3 baterii R6.
$0.95
Set de Potențiometre Asortate Plusivo
$6.00
Placă de Dezvoltare Compatibilă cu Arduino Pro...
$5.52
Placa PCB pentru prototipare 8x12cm pas de 2.54 mm
$0.96
Convertor de nivel logic cu 2 canale 3.3V 5V TTL
$0.72
Modul Invertor 12 VDC către 220 VAC de 500 W...
$21.60
Acest modul este un convertor TTL la RS485,...
$4.64
Placa PCB pentru prototipare 6x8cm pas de 2.54 mm
$0.48
Mufa banană 4 mm roșie
$1.20