Modul Amplificator Audio 2x50 W TPA3116D2

Specificații tehnice:

• Tensiunea de alimentare: 5 V - 24 V DC;
• Frecvența suportată: 20 Hz - 20 KHz;
• Ieșire: stereo;
• Protecții împotriva:
  • Sub alimentării;
  • Supra alimentării;
  • Supra încălzire;
  • Polarizării inverse;
  • Scurt circuit.
• Dimensiuni: 84 mm x 51 mm x 29 mm (fără potențiometru).
• Maximum output power: 2 x 50 W;

Instructions for use:

1. Power up the module with a DC voltage between 5 V and 24 V.

The module is powered by screw terminals (green border). Be careful to observe the polarity.

2. Connect the speakers.

Connect the speakers to the terminals with blue-screwed screws. Each border corresponds to an output channel.

3. Connect an audio source.

Audio input can be done in 2 ways:

• 3.5 mm jack connector;
• Pinned pins with orange: The outer pins are the two channels, and the middle pins are  GND.

4. Adjust the volume.

The volume is adjusted by means of the potentiometer mounted on the PCB.