View larger
0104110000085214
New product
1.3inch OLED (B)
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
| DRIVER CHIP | SH1106 |
| INTERFACE | 3-wire SPI, 4-wire SPI, I2C |
| RESOLUTION | 128*64 |
| DISPLAY SIZE | 1.3inch |
| COLORS | Blue |
| VISIBLE ANGLE | >160o |
| OPERATING TEMP. (oC) | -30~70 |
| STORAGE TEMP. (oC) | -30~80 |
| OPERATING VOLTAGE | 3.3V / 5V |
| APPLICABILITY | Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
| PIN NO. | SYMBOL | DESCRIPTION |
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
| MODE/INTERFACE | BS0/BS1 | DIN | SCK |
| 3-wire SPI | 1/0 | MOSI | SCLK |
| 4-wire SPI | 0/0 | ||
| I2C | 0/1 | SDA | SCL |
The 1.3inch OLED provides 2 options for the onboard pinheader:
_1.jpg)
Weight: 0.008 kg
Relay mode with a channel suitable for...
$1.20
40p 1.27 mm Male Pin Header See description...
$0.31
Three-in-one soldering iron stand. It holds the...
$1.08
This is a micro USB Li Po battery charger...
$0.94
This battery case can hold 1 x 18650 3.7 V...
$0.84
USB OTG Cable See description for more details...
$0.96
This is a DC power adapter that you can use to...
$2.40
LCD 2004 with Blue Backlight See description...
$7.20
This small SD card slot breakout board allows...
$1.05
0.25 m 90 degree USB Type C
$1.20