Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
704256800888
New product
Power your Pi with a wide range of (DC) input voltages from 3 to 16V!
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Availability date:
Power your Pi with a wide range of (DC) input voltages from 3 to 16V!
Wide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it straight to your Pi's pins and still use HATs and pHATs on top.
The barrel jack connector on Wide Input SHIM is a 3.5mm outer diameter (OD), 1.3mm inner diameter one, and there's a short male to female adapter cable included to allow you to use the common 5.5mm OD barrel jacks too.
There's also a short cable included with a 3.5mm OD barrel jack on one end and tinned wires on the other, in case you want to attach it directly to something like a bench power supply or to solder it into a project.
If you need a longer power cable, then there's a 1.5m long 3.5mm OD male to tinned wires cable available separately.
You can supply a range of DC input voltages to Wide Input SHIM, either through the centre positive 3.5mm outer diameter barrel jack connector, or through the two broken-out + and - pins on the SHIM.
The board will provide 5V/2A output (through the GPIO to the Pi) at input voltages of 5V to 16V. Current drops to 1.5A at 4V, and 1A at 3V.
Pulling the EN (enable) pin to ground will cut the 5V voltage output, although it should be noted that you should shut your Pi down cleanly before doing this!
UTP Cat6 Patch Cord, Gray, 2 m See description...
$1.20
Drilled Plastic Panel - Yellow See description...
$0.83
Female Connector for DC 5.5x2.1 mm Power Jack...
$0.48
The VARTA lithium battery range meets the...
$9.60
This card is compatible with LiPo and Li-ion...
$2.26
Genuine Product The latest series of...
$72.58
Imagine a sensor shield which you can use with...
$35.76
Red Case for Raspberry Pi Zero
$2.40
433 MHz Receiver Transmitter Pair See...
$1.56
Logical analyzer that can be used to see the...
$13.68