Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Holders and Mounting Accessories
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
Holders and Mounting Accessories There are 224 products.
-
-
-
Rectangular metal fixing plate 55x10 mm
Rectangular metal fixing plate 55x10 mm
1,99 leiOut of stock -
Rectangular metal fixing plate 35x10 mm
Rectangular metal fixing plate 35x10 mm
1,89 leiOut of stock -
-
Arduino Mounting Board
This is a mounting board for your Arduino development board.
9,99 leiOut of stock -
-
10*6 mm Metal M3 Hex Pillar
10*6 mm Metal M3 Hex Pillar See description for more details about the product. Add to cart now!
1,19 leiOut of stock -
Aluminium Clamping Leg for Servo-Side Connection
Aluminium Clamping Leg for Servo-Side Connection
19,99 leiOut of stock -
15x6 mm Metal M3 Hexagonal Pillar
15x6 mm Metal M3 Hexagonal Pillar See description for more details about the product. Add to cart now!
0,85 leiOut of stock -
-
M2 White Plastic Hexagonal Pillar (6 mm)
M2 White Plastic Hexagonal Pillar (6 mm)
0,49 lei 0,99 leiOut of stock -
-
M2 Black Plastic Hexagonal Pillar (7 mm)
M2 Black Plastic Hexagonal Pillar (7 mm)
0,99 leiOut of stock -
M2 Black Plastic Hexagonal Pilar (6 mm)
M2 Black Plastic Hexagonal Pilar (6 mm)
0,99 leiOut of stock -
M2 Black Plastic Hexagonal Pilar (5 mm)
M2 Black Plastic Hexagonal Pilar (5 mm)
0,99 leiOut of stock -
20x6 mm Metal M3 Hexagonal Pillar
Hexagonal threaded spacers are ideal for mounting between PCB circuit boards and machine boards. See description for more details about the product. Add to cart now!
1,92 lei 2,99 leiOut of stock -
60x6 mm Metal M3 Hexagonal Pillar
60x6 mm Metal M3 Hexagonal Pillar See description for more details about the product. Add to cart now!
4,99 leiOut of stock -
35*6 mm Metal M3 Hex Pillar
35*6 mm Metal M3 Hex Pillar See description for more details about the product. Add to cart now!
1,99 lei 3,99 leiOut of stock -
10*6 mm White M3 Hex Pillar
10*6 mm White M3 Hex Pillar See description for more details about the product. Add to cart now!
0,99 leiOut of stock -
-
-
-
8*6 mm Black M3 Hex Pillar
8*6 mm Black M3 Hex Pillar See description for more details about the product. Add to cart now!
0,49 leiOut of stock -
-
20*6 mm Black M3 Hex Pilar
These Hex Nylon Standoffs have good mechanical strength, wear resistance, corrosion resistance. See description for more details about the product. Add to cart now!
0,99 leiOut of stock -
-
-
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, M3 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included). We have an assortment of...
29,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 1/4" (6.35mm) Shaft, No. 4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch (6.35 mm) diameter motor shafts. The set includes two hubs, four #4-40 set screws for securing the hubs to motor shafts, and one 0.05" Allen wrench for use with the set screws. Each hub has six threaded mounting holes for #4-40 screws (not included). We...
39,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 1/4" (6.35mm) Shaft, M3 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch (6.35 mm) diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included). We have an...
39,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, No. 4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four #4-40 set screws for securing the hubs to motor shafts, and one 0.05" Allen wrench for use with the set screws. Each hub has six threaded mounting holes for #4-40 screws (not included). We have an...
39,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included). We have an assortment of...
39,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included). We have an assortment of...
34,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, No. 4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05" Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included). We have an...
34,99 leiOut of stock -
Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Multi-Option
These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for many different sensor mounting...
15,00 lei 17,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included) We have an assortment of...
34,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, No.4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05" Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included). We have an...
34,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, No.4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05" Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included). We have an...
29,99 leiOut of stock -
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, No.2-56 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #2-56 screws (not included). We have an...
29,99 leiOut of stock -
Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Perpendicular
These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for a tall and slender perpendicular...
17,99 leiOut of stock -
SK20 Linear Axis Holder (ID 20 mm)
This SK20 linear axis holder is used to restrict an object to a single axis of motion.
12,99 lei 17,99 leiOut of stock -
Mounting Bracket for Standard-Size Servos
This plastic bracket provides a convenient way to mount standard-size servos with a side flat to a surface. See Description for more details about the product. Don't delay, buy today. Add to cart now!
17,99 leiOut of stock -
SK20 Linear Axis Holder
This SK20 linear axis holder is used to restrict an object to a single axis of motion. See description for more details about the product. Add to cart now!
11,99 leiOut of stock -
SK16 Linear Axis Holder (ID 16 mm)
SK16 Linear Axis Holder (ID 16 mm)
9,99 lei 14,99 leiOut of stock -
Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Parallel
These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it. These brackets, which allow for a low-profile parallel sensor...
17,99 leiOut of stock -
Corner Connector for 20 mm V-Slot Profiles
Corner Connector for 20 mm V-Slot Profiles See description for more details about the product. Add to cart now!
2,49 leiOut of stock -
Corner Connector Bracket for 28x28 mm Profiles
Corner Connector Bracket for 28x28 mm Profiles
2,99 leiOut of stock
