It includes the most common resistor...
This sensor can accurately detect temperature and humidity, it is easy to use thanks to the I2C interface, has low power consumption and resolution can be set to 8 or 12 bit for temperature and 12/14 bits for humidity.
This sensor with 0.5m cable is for precision temperature sensing which can be used in laboratory, industrial processes, and more.
The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs.
The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor.
The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments.
This breakout has a really cool IR sensor from TI that can measure the temperature of an object without touching it!
SparkFun IR Thermometer Evaluation Board - MLX90614
This sensor with 0.5m cable is for precision temperature sensing which can be used in a laboratory, industrial processes, and more.
BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor
The embedded thermopile sensor generates a very very small voltage depending on how much IR there is, and using some math, that micro voltage can be used to calculate the temperature.
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
This chip is good for use with power and logic voltages ranging from 2.4V to 5.5V so you can use it with your 3V or 5V microcontroller. There's a basic temperature sensor inside but there's no specifications in the datasheet so we're not sure how accurate it is.
This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect up to 8 to a single I2C bus without address collisions.