SAKATA 3D PLA 850 filament is...
Development Kit, EasyPIC V7, Supports 370+ PIC MCU's in DIP Packaging, mikroProG Programmer
Arduino Compatible Expansion Board for Onion Omega
The Breadboard Dock brings breadboard compatibility to the Omega! Power the Dock and your Omega with any Micro USB cable and plug it directly into a standard breadboard. The Omega’s pins are mapped 1-to-1 onto the breadboard, allowing you to access all of the Omega’s I/Os in your breadboard project.
The Omega ADC Expansion will bring a new world – the analog world – directly to your Omega2 projects. Based on the ADS1115 analog-to-digital converter chip, this Expansion provides 4 analog input channels, each with 16 bits of precision at a maximum of 860 samples per second, and communicates with your Omega using I2C.
Features: Xtensa® dual-core 32-bit LX6 microprocessor Up to 240MHz clock frequency 16MB of flash storage 520kB internal SRAM Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) 2.3 to 3.6V operating range 21 GPIO 8-electrode capacitive touch support Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) 2.5 µA deep...
Adafruit Feather M0 Express - Designed for CircuitPython (ATSAMD21Cortex M0)
This development board is based on the 32-bit ARM processor, compatible with Maple Mini. It is programmed with Maple IDE, a development environment very similar to Arduino IDE, even though the architectures are completely different.
Development Board with STC89C52 Microcontroller and NRF24L01 + Wireless Transceiver
Development board based on ATSAMD21G18 ARM Cortex M0 . It can be the basis of many electronic projects and used with other devices such as ethernet or bluetooth sensors or shields can be a good way to automate your home.
This board is just like the BeagleBone Black but small enough to fit in your wallet.
SparkFun Pro nRF52840 Mini - Bluetooth Development Board
METRO Mini is the culmination of years of playing with AVRs: we wanted to make a tiny, breadboard-friendly development board that is easy to use and is hacker friendly. Metro Mini can be programmed with the Arduino IDE.
Is it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The SAMD51 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with minimal working space.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
7688 Duo LinkIt Smart with MT7688 (580 MHz, 128 MB RAM, WiFi) and ATmega32u4
Universal Miniature Expansion Board for Onion Omega
The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & asset tracking.
Breakout for LinkIt Smart 7688 v2.0 with Ethernet, Audio, USB, UART, I2C and Grove Connectors
You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that project, and countless others are easier than you think they are with MaKey MaKey
Sonoff DEV is a universal low-cost WiFi development board designed by ITEAD.A lot of Sonoff fans keep asking firmware programming questions, now this version is just the module you are looking for.With only one micro USB cable to connect to PC, users can start to develop and design IoT device right away.Sonoff DEV supports to program personal firmware!...