SAKATA 3D PLA 850 filament is...
HackRF One is a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
Wireless Development Board with ESP32 Microcontroller
WiPy 2.0 development board that can provide WiFi and Bluetooth connectivity, as well as a host of GPIO peripherals and pins. The product is based on the new ESP32 integrated circuit for both processing and communication. Programming can be done very easily with your own IDE using the Python programming language.
The HC-05 bluetooth module is a high performance and consumes very little energy. Also, its dimensions are small. The product can be used in your innovative projects where you need to transmit data very easily but not by cable at reasonable distances of up to 10m.
This module has the advantage of being remote controlled and having four relays that work on a voltage of 12 V with a very small current draw of 5mA.
The SparkFun Simultaneous RFID Reader is an Arduino-compatible board to get you started with the M6E Nano UHF RFID Reader. Radio Frequency Identification (RFID) is becoming popular everywhere for tracking practically everything.
Linux and WiFi Onion Omega2 Plus (580 MHz CPU, 128 MB DDR2) Development Board
The LoPy is a MicroPython enabled microcontroller (LoRa, Wifi, Bluetooth) - a perfect enterprise-grade IoT platform for your connected Things. With the latest Espressif chipset, LoPy offers a perfect combination of power, friendliness, and flexibility. Create and connect your things everywhere. Fast.
CC2530 Wireless Communication Module with Serial Interface
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB.
The ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is made of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow.
This Bluefruit LE Friend is programmed with a special firmware image that turns it into an easy to use Bluetooth Low Energy sniffer.
ESP32 Wireless Development Board with Card Slot and BLE (4 MB memory)
Features: RF 250Kbps, Serial 1Mbps 300ft (indoor) to 2 mile (outdoor) range Transmit power +19dBM @ 135mA Receiver Sensitivity -103dBm @ 15mA 4x 10-bit ADC inputs 15x Digital I/O pins HCS08 CPU at up to 50.33MHz 128/256 bit AES Encryption 2.1V to 3.6V operating voltage 1.7 μA power-down current Built in RS-485 support AT command or API frame support FCC...
Features: RF 250Kbps, Serial 1Mbps 300ft (indoor) to 2mile (outdoor) range Transmit power +19dBM @ 135mA Receiver Sensitivity -103dBm @ 15mA 4x 10-bit ADC inputs 15x Digital I/O pins HCS08 CPU at up to 50.33MHz 128/256 bit AES Encryption 2.1V to 3.6V operating voltage 1.7 μA power-down current Built in RS-485 support AT command or API frame support FCC...
Linux and WiFi Onion Omega2 (580 MHz CPU, 64 MB DDR2) Development Board
It is based on the ESP32 microcontroller that boasts wifi, bluetooth, ethernet and low power support all in a single chip.
This is a wireless computer keyboard with very wonderful features. It's a 2.4GHz Backlit Mini Wireless QWERTY keyboard with TouchPad and a USB interface adapter. It's perfect to be used in lectures, reports, presentation and more
This is the Pro (higher-power) version of the popular XBee! This module is series #1 (802.15.4 protocol) 60mW wireless module, good for point-to-point, multipoint and convertible to a mesh network point. These are much more powerful than the plain XBee modules, great for when you need more range.
The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science, and Medicine) radio band. It’s perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
Features: RF 250Kbps, Serial 1Mbps 200ft (indoor) to 4000ft (outdoor) range Transmit power +8dBM @ 40mA Receiver Sensitivity -103dBm @ 15mA 4x 10-bit ADC inputs 15x Digital I/O pins HCS08 CPU at up to 50.33MHz 128/256 bit AES Encryption 2.1V to 3.6V operating voltage 1.7 μA power-down current Built-in RS-485 support AT command or API frame support...
This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging.