Ingeo 3D870 is a grade developed for...
This product is a switching voltage source and can provide a constant voltage or constant current output. With this mode of operation, it has very good efficiency and dissipates only very little heat compared to a linear source. The functions of the three potentiometers can be seen in the presentation images.
LTC3780 Buck-Boost synchronous Buck-Boost with adjustable current and voltage (Up / Down) in your projects where you need to maintain a constant output voltage regardless of the main power supply value.
5 A Power Supply with Adjustable Current and Voltage
Step Down DC-DC Power Supply with Display (5 A, IN: 6.5 - 36 V, OUT: 1.2 - 32 V)
This product is a downward voltage source that can help you build your own adjustable source or to power a wide range of projects running at power up to 200W. The topology of operation is optimized for high power, this being a synchronous buck type.
This is a XL4015 5A adjustable step-down DC-DC module which is useful for your projects. This module can be a source of voltage and current for your projects.
This powerful step-up/step-down regulator efficiently produces an adjustable 9 V to 30 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%.
XL4015 with Adjustable Current and Voltage DC-DC Step Down Power Supply with Display (5 A)
The product is useful in a wide range of applications and is small in size. It can be easily used in spaces without good ventilation at currents up to 2.5A. Careful! The output voltage must be at least 1.5V higher than the input voltage.
The S9V11F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2 V and 16 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V.
Buck-Boost Power Supply Module with Display (IN: 5.5 - 30 V, OUT: 0.5 - 30 V, 3 A)
The compact (0.32″×0.515″) U3V12F9 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 9 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
This product is a switching source with two symmetrical outputs, + 12V and -12V, useful to power low-power logic circuits. It can provide a maximum current of 50mA or 30mA on the two channels, to a very small rip and very good efficiency.
The compact (0.5″ × 0.7″) D24V10F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 1 A.
The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V.
This regulator offers typical efficiencies between 80% and 90% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 3.3 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
XHM130 Step-down DC-DC Power Supply with Constant Current (Input: 3 - 38 V, Output: 1.25 - 36 V)
This low-voltage ripper is small in size, uses TDK inductors to reduce noise and heat and does not interfere. Efficiency can reach 94%.