Ingeo 3D870 is a grade developed for...
MBIT-WEARIT - Development Kit, Micro:Bit Wear:It, Wearable/Fitness Tracking Prototyping
MINODE_KIT_V1 - Development Kit, For Micro:Bit, 10 x Sensor Modules, IoT Development
This module is a great extension for your Micro:Bit and you do not need any skills to mount it, just slot in your Micro:Bit and code Touch:Bit with Microsoft MakeCode editor. You can easily link functions to specific button presses, have the LEDs on each button light automatically on a touch, or set the LEDs manually.
The SparkFun gator:environment micro:bit Accessory Board utilizes the popular CCS811 and BME280 ICs to take care of all of your environmental readings of atmospheric quality.
This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280) interface for the BBC microbit. The environmental sensor will give the ability to measure temperature, barometric pressure and humidity. The RTC will give the ability to read current time and date.
The MAX30102 is a high-sensitivity pulse oximeter and heart-rate sensor that communicates over an I2C bus. The specified operating voltage for the MAX30102 is between 1.7V-2V. For use with the gator:bit (v2) and micro:bit, you should provide 3.3V through the 3V3 and GND pads to keep the logic levels consistent; the 3.3V input is then regulated to 1.8V for...
Micro:Bit Breadboard Breakout Board With the Breadboard breakout for the BBC micro:bit you can plug a microbit into a standard 2.54mm pitch breadboard, across the center, just like a standard IC. Does not include the breadboard seen in the images!
This module makes it easier to use Micro: Bit by dividing the pins along its edge. Spacing between pins allows use in e-textile projects as well as in projects that require the use of crocodile connectors. Attaches directly to Micro: Bit via 5 screws for PO, P1, P2, 3V & GND pins.
Protective Case for the micro:bit or MI:power board - Clear
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into SparkFun's gator:bit series of gator-clippable accessories, enabling it to be easily interfaced with the micro:bit or other microcontrollers! It provides a binary indication of the presence of sound and an analog representation of its amplitude.
gator:bit Compatible Contacts: PWR: INPUT: Power to the sensor (3.3V-5V) SIG: OUTPUT: Analog voltage representing conductivity between probes GND: REFERENCE: Ground reference (0V) Probes: Used to sample soil moisture content for sensor
Kitronik's Mi:power case for BBC micro:bit and Mi:power board offers complete protection whilst retaining portability. This case is available in 4 colours.