Manufacturers
LM2596 Step Down DC-DC Power Supply Module (fixed 5V output)
MPPT DC-DC Step-Down Module (5 A) See description for more details about the product. Add to cart now!
With this Step Down DC-DC Power Supply you can control output voltage and Maximum Output Current It can provide up to 32V voltage and 12A current at output. It has a bulit-in LCD panel that displays the Input & Output voltage, output current and power consumption. The Output has enable/disable button. See description for more details about the product....
Adjustable power supply with color display, output voltage up to 50V and accuracy of 0.5%. See description for more details about the product. Add to cart now!
Adjustable Step-down DC-DC Module, 8 A (Input: 4 - 40 V, Output: 1.25 - 36 V) See description for more details about the product. Add to cart now!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V. The board measures only 0.7" x 0.7" yet delivers typical continuous output currents between 1.4 A and 2.2 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors...
This product is a downward voltage source that can help you build your own adjustable source or to power a wide range of projects running at power up to 200 W. The topology of operation is optimized for high power, this being a synchronous buck type. See description for more details about the product. Add to cart now!
This isolated power supply module is an industrial power module with high resistance against overheat and short circuits. See description for more details about the product. Add to cart now!
This is a power supply with adjustable current and voltage module which is used to adjust and monitor the output voltage with the use of numerical LED display. See description for more details about the product. Add to cart now!
This product is a switching voltage source and can provide a constant voltage or constant current output. With this mode of operation, it has very good efficiency and dissipates only very little heat compared to a linear source. The functions of the three potentiometers can be seen in the presentation images. See description for more details about the...
This isolated power supply module is an industrial power module with high resistance against overheat and short circuits. It has a LED indicator that allows you to see if the module is working or not. This is perfect to be used as a power source for your projects. See description for more details about the product. Add to cart now!
Power Supply Module (220 V to 12 V, 8 A) is useful for powering projects with high power consumption. See description for more details about the product. Add to cart now!
DPS3012 Adjustable Power Supply (30 V, 12 A) See description for more details about the product. Add to cart now!
300W 20A DC-DC Buck Converter Step-down Module Constant Current See description for more details about the product. Add to cart now!
KIS3R33S DC-DC Step-Down Converter Module See description for more details about the product. Add to cart now!
This isolated power supply module is an industrial power module with high resistance against overheat and short circuits. See description for more details about the product. Add to cart now!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 9 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 2.3 A and 3.4 A, depending on the input voltage, which makes it well suited for powering moderate loads like sensors or...
This isolated power supply module is an industrial power module with high resistance against overheat and short circuits. See description for more details about the product. Add to cart now!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 7.5 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 2 A and 3.7 A, depending on the input voltage, which makes it well suited for powering moderate loads like sensors or...
Power Supply Module (220 V to 24 V, 6 A) useful for your innovative electronics projects that require a maximum power of 100 W at a voltage of 24 V. See description for more details about the product. Add to cart now!
This is a step-down DC-DC module that helps you in lowering the voltage to very good efficiency. See description for more details about the product. Add to cart now!
Isolated Power Supply mode (220 V to 12 V, 0.45 A) useful for powering a variety of your projects. See description for more details about the product. Add to cart now!
Useful adjustable low voltage power supply to power different projects and observe on-screen tensions. See description for more details about the product. Add to cart now!
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making...
The compact (0.4" x 0.5") D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 90% and 95% and has a very low dropout, so it can be used with input voltages as low as a few hundred...
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7" x 0.7" yet delivers typical continuous output currents between 1.6 A and 2.4 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors...
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making...
This high efficiency 3 A DC-DC step down regulator can connect to car battery without the need for switching and also it can connect to cigarette lighter line or ACC power line. See description for more details about the product. Add to cart now!
This DC-DC step down module is based on MP1584EN chip, this is capable of driving a 3 A load and converts input voltage between 4.5 V to 28 V into smaller voltage between 0.8 V to 20 V. See description for more details about the product. Add to cart now!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 12 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 2 A and 3.3 A, depending on the input voltage, which makes it well suited for powering moderate loads like sensors or...
XL1509 USB Voltage Drop Module See description for more details about the product. Add to cart now!
Adjustable Voltage Lowering Module LM2596
Adjustable Voltage Lowering Module LM2576HV DC-DC 5-60V to 1.25-26V
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 5 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 2.5 A and 4 A, depending on the input voltage, which makes it well suited for powering moderate loads like sensors or...
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4.5 V to 50 V and efficiently reduces it to 3.3 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 3.2 A and 4.5 A, depending on the input voltage, which makes it well suited for powering moderate loads like...
This is a XL4015 5A adjustable step-down DC-DC module which is useful for your projects. This module can be a source of voltage and current for your projects. See description for more details about the product. Add to cart now!
Model: MINI560 Type: Power Module Power supply current: 5A Power supply voltage: 5V Colour: as shown Material: PCB Size: 2.9×1.8×0.54cm See description for more details about the product. Add to cart now!
Input Voltage: 6.0V-60V Output Voltage: 3.3-40V Adjustable Efficiency: 97% (MAX) Load capacity: large 10A Wiring method: the terminal is free of soldering, IN is input, OUT is output. See description for more details about the product. Add to cart now!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 5 V with an available output current of around 15 A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. The regulator features reverse voltage...
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 12 V with an available output current of around 15 A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. The regulator features reverse voltage...
This low voltage source can be adjusted, you can get voltages between 0.8 V and 17 V via potentiometer setting and have a maximum output current of 3 A. See description for more details about the product. Add to cart now!
This is a step-down power supply with high efficiency (40 V, 6 A) which is a useful source to build your own lab or to be integrated into your innovative projects. See description for more details about the product. Add to cart now!
XHM130 Step-down DC-DC Power Supply with Constant Current (Input: 3 - 38 V, Output: 1.25 - 36 V) See description for more details about the product. Add to cart now!
Synchronous Adjustable Step-Down Voltage Regulator (15 A, 60 V)(without case)
This compact (0.4" x 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making...
12 A adjustable step-down voltage source which is useful to build your own power adjustable laboratory. It has high power which is suitable for your experiments. See description for more details about the product. Add to cart now!
Adjustable source, with color display, output voltage up to 30V and accuracy of 0.5%.See description for more details about the product. Add to cart now!
Adjustable source, with color display, output voltage up to 30 V and accuracy of 0.5%. See description for more details about the product. Add to cart now!