SAKATA 3D PLA 850 filament is...
Active ABS Enclosure for 18'' ABS Speakers 4218 USB/FM/BT
15 inch active enclosure with SD / USB mp3 player, radio, remote control and 2 wireless microphones. It also works without power using the built-in battery. It can be powered separately from both the 220V outlet and the 12V battery.
2115AMS Active ABS Enclosure for 15'' Speakers USB/SD/FM/BT
10inch active enclosure with SD / USB mp3 player, radio, remote control and 2 wireless microphones. Operation and no power on the built-in battery.It can be powered separately from both the 220V outlet and the 12V battery.
2115DA-R Active ABS Enclosure for 15'' Speaker USB/SD/FM/BT/ACCU
This audio converter converts the digital signal (optical or coaxial) in a stereo analog signal. The signal received on the input SPDIF (TOSLINK) or coaxial output is converted and transmitted to stereo L / R RCA jacks standard.
2110AMS Active ABS Enclosure for 10'' Speaker USB/SD/FM/BT
2110DA-R Active ABS Enclosure for 10'' Speaker USB/SD/FM/BT/ACCU
2108DA-R Active ABS Enclosure for 8'' Speaker with USB/SD/FM/BT/ACCU
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). See description for more details about the product. Add to cart now!
This is a small and inexpensive MP3 module that can be directly connected to speakers. It can be controlled by any microcontroller serial port. The module has a built-in hardware decoder for MP3, WAV and WMA.
Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. See description for more details about the product. Add to cart now!
Product Features : Supply voltage: 2.4V - 5.5V; Current consumption: 30mA; Integrated microphone on board; An integrated amplifier that can directly control an 8 ohm impedance loudspeaker and 0.5W power; Record and play buttons; It can record up to 16 seconds.
This electret microphone module is a high-quality amplifier. It has a single/dual input of 20dB. This is useful in recording sounds, applicable to portable audio devices such as laptops, cell phones, and handheld computers.
Listen to this good news - we now have an all in one digital audio amp breakout board that works incredibly well with the Raspberry Pi! If you're looking for an easy and low-cost way to get your digital sound files bumpin' then the MAX98357 I2S Amp Breakout is for you. See description for more details about the product. Add to cart now!
Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It's a fun-size version of our Music Maker shield for Arduino, and similar to our other Music Maker FeatherWing, but this one is even better - with an on-board 3 Watt amplifier! See description for more details about the product. Add to cart now!
TDA8954TH Dual Chip Audio Amplifier Module (24 V, 2 x 420 W)
The adapter is designed to transfer the HDMI signal from a computer, laptop, PS3, Xbox etc. to a VGA signal and display at high resolutions such as monitors, LCD TVs, projectors, etc. This is a portable adapter that makes transfer from HDMI HD in to VGA output.
PCM5102A Audio Stereo DAC with 32-bit 384 kHz PCM Interface
3.5 mm 4-Pin Socket to 2 x 3.5 mm Stereo Plug Adapter Cable, Black