It includes the most common resistor...
The LIDAR-Lite 3 Laser Sensor is an essential, powerful, scalable and economical laser based measurement solution supporting a wide variety of applications (eg, drones, general robotics, industrial sensing and more). Measures distance, velocity and signal strength of cooperative and non-cooperative targets at distances from zero to more than 40 meters.
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate digital I/O-measurable output.
This sensor has a calibrated light sensing algorithm that can calculate UV Index.
This sensor module has 8 IR LEDs / phototransistor pairs mounted on a 0.375 "pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in half to reduce the current consumption, and a MOSFET allows the LEDs to be off sensor for additional sensing or power-saving options.
This product is a module with 8 analogue infrared sensors useful for building your own line follower. Infrared sensors are based on the radiation property of this wavelength, ie the white areas reflect the received IR radiation, and the black surfaces absorb the received IR radiation.
Skyzone SKY-HD01 FPV Camera and 400 mW Wireless Transmitter with 40 Channels
RPI NOIR CAMERA BOARD. - Raspberry Pi NoIR Camera Board, Version 2
Infrared Line Sensor Module with adjustable sensitivity for line-follower robots or for easy differentiation between white and black.
TEMT6000 SparkFun Ambient Light Sensor Breakout Module
Infared Digital Obstacle Senzor Module (3 - 100 cm Adjustable)
This module is based on the AEDR-8300 optical sensor. It has a built-in LED, is TTL-compatible, and the smallest sensor in its range can be used to detect movement.
This reflectance sensor module is designed for use with the Zumo shield for Arduino. It has six IR LED/phototransistor pairs that can be used for line following or edge detection; each sensor provides an independent, digital I/O-measurable output.
The AS7262 Breakout is unique in its ability to communicate by both an I2C interface and serial interface using AT commands.
Your electronics can now see in dazzling color with this lovely color light sensor.
This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, making this array a great minimal sensing solution for a line-following robot. Each sensor provides a separate analog voltage output.
The Colour module detects RGB colour, as well as ambient light level. It also has two bright white LEDs to illuminate objects whose colour is being detected.
RPI 8MP CAMERA BOARD - Raspberry Pi Camera Board, Version 2
The TCS34725 has RGB and clear light sensing elements
Four Infrared Sensor Matrix for Line Following Robots
The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from 188 uLux up to 88,000 Lux on the fly.