Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Motors
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
Viewed products
-
Gravity:...
Gravity: Electrochemical Oxygen...
Motors There are 382 products.
-
FS5106R Servomotor with Continuous Rotation
FS5106R Servomotor with Continuous Rotation See description for more details about the product. Add to cart now!
$13.20Out of stock -
FS5113R Servomotor with Continuous Rotation
The FS5113R is a 56 g analogue servo that offers position control over a 360o operating angle for standard servo pulses between 500 - 2500 μs. See description for more details about the product. Add to cart now!
$28.80Out of stock -
6kg*cm Plastic Gears Analog Servomotor
6kg*cm Plastic Gears Analog Servomotor See description for more details about the product. Add to cart now!
$7.95 $16.08Out of stock -
9 g Servomotor, 270° Rotation and Metallic Reducer
9 g Servomotor, 270° Rotation and Metallic Reducer
$15.12Out of stock -
FS6535M 33 kg * cm High Torque Servomotor
FS6535M 33 kg * cm High Torque Servomotor
$57.60Out of stock -
FS5106M Servomotor with 2BB Metalic Reducer
FS5106M is a 2BB standard analog servo motor. The scope of rotation is 120 degrees. The operating speed ranges from 0.18sec/60degree to 0.16sec/60degree according to the voltage supplied. See description for more details about the product. Add to cart now!
$16.80Out of stock -
FS5109M Servomotor with 2BB Metalic Reducer
This is a great general-purpose actuator for tiny mechanisms. See description for more details about the product. Add to cart now!
$16.80Out of stock -
FS5109R Degree Continuous Rotation Servomotor with 9kg*cm Couple
FS5109R Degree Continuous Rotation Servomotor with 9kg*cm Couple See description for more details about the product. Add to cart now!
$28.56Out of stock -
FT5310M 10 kg * cm Metalic Gear Servomotor
FT5310M 10 kg * cm Metalic Gear Servomotor
$26.88Out of stock -
FT5312M 12 kg * cm Servomotor with Metalic Reducer
FT5312M 12 kg * cm Servomotor with Metalic Reducer See description for more details about the product. Add to cart now!
$26.88Out of stock -
FT5316M 15 kg * cm Servomotor with Metalic Reducer
FT5316M 15 kg * cm Servomotor with Metalic Reducer See description for more details about the product. Add to cart now!
$27.12Out of stock -
FT5513M 0.12 sec / 60° 12 kg * cm Servomotor
FT5513M 0.12 sec / 60° 12 kg * cm Servomotor See description for more details about the product. Add to cart now!
$40.80 $64.80Out of stock -
Servomotor with Continuous Rotation 3 kg * cm
Servomotor with Continuous Rotation 3 kg * cm See description for more details about the product. Add to cart now!
$14.64Out of stock -
-
FT5610M High Speed Servomotor Low Profile
FT5610M High Speed Servomotor Low Profile
$52.80 $57.60Out of stock -
Digital Servomotor with High Torque Pololu HD-1235MG
The Power HD 1235MG servo is all about torque. This 1/4-scale servo can deliver an incredible 560 oz-in of torque at 7.4 V or 490 oz-in at 6 V, and it features an all-metal gear train, digital control electronics, and two ball bearings on the output shaft. Key specs at 7.4 V: 0.18 sec/60°, 560 oz-in (40 kg-cm), 170 g. See description for more details...
$85.20Out of stock -
Servo Digital MG/BB HK15298 Standard 15 kg / 0.11 sec / 6
HK15298 High Voltage Coreless Digital MG/BB Servo See description for more details about the product. Add to cart now!
$40.56Out of stock -
Feetech FS5113M 13 kg * cm Servomotor with Metalic Reducer
Feetech FS5113M 13 kg * cm Servomotor with Metalic Reducer See description for more details about the product. Add to cart now!
$24.00Out of stock -
Feetech FS5115M 2BB 15 kg * cm Servomotor with Metalic Reducer
Feetech FS5115M 2BB 15 kg * cm Servomotor with Metalic Reducer
$24.00Out of stock -
13kg*cm 180 Degree Rotation Servomotor FR5113M
13kg*cm 180 Degree Rotation Servomotor FR5113M See description for more details about the product. Add to cart now!
$31.20Out of stock -
Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
This NEMA 11-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 3.8 V, allowing for a holding torque of 600 g-cm (8.3 oz-in). See description for more details about the product. Don't delay, buy today. Add to cart now!
$17.71 $28.56Out of stock -
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allowing for a holding torque of 180 g-cm (2.5 oz-in). With a weight of 60 g, this is one of the smallest stepper motors we carry. See description for more details about the product. Don't delay, buy today. Add to cart now!
$36.96Out of stock -
6.3:1 Metal Gearmotor 37Dx50L mm 12V (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 6.25:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
$49.44Out of stock -
10:1 Metal Gearmotor 37Dx50L mm 12V (Helical Pinion)
This gearmotor is a powerful brushed DC motor with 10:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an...
$47.76Out of stock -
A4990 Dual Motor Driver Shield for Arduino
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its integrated A4990 dual motor driver operates from 6 V to 32 V and can deliver a continuous 0.65 A to each motor channel, making it a great control option for low-current motors that run on high voltages. The A4990 is...
$13.44Out of stock -
Step By Step 28BYJ048 5V Motor and ULN2003 Driver (Green)
The driver is based on an integrated ULN2003 circuit that contains several Darlington configurations. It works at very good parameters along with the stepper motor in the kit. See description for more details about the product. Add to cart now!
$4.29Out of stock -
Set of 5 17HS8401S Stepper Motors (1.7 A, 0.59 Nm)
• Low noise. • Low heat. • Smooth operation. • Good acceleration performance. See description for more details about the product. Add to cart now!
$45.60Out of stock -
Multistar Elite 2306-2150KV Mini Monster Quad Racing Motor - Set Of 4 CW/CCW
Look no further for the ultimate in durability and power in mini quad motors. The new Multistar Elite 2306 2150KV MINI MONSTER is here See description for more details about the product. Add to cart now!
$100.56Out of stock -
Steering Device for MG995 and MG996 Servomotors
Device Routing actuators MG995 and MG996. With this device, you can mount a camera and with the help of the two axes of freedom you can watch an object in motion or film at different angles. Or you can attach different sensors and develop projects from this small and useful device for servomotors. See description for more details about the product. Add...
$4.07Out of stock -
SmartElex 10S DC Motor Driver HAT
Brush DC Motors Drivers are the most widely used drivers due to their low cost and simple drive control options. SmartElex 10S DC Motor Driver HAT is one of its powerful motor driver boards. This motor driver has a lot of great features that make it useful for a wide variety of mechatronics applications. See Description for more details about the...
$12.00Out of stock -
DM542 Stepper Motor Driver
DM542 128 Stepper Motor Driver 4.2A DC24-60V For Nema 17/23/34 Stepper Motor CNC Engraving Machine. See description for more details about the product. Add to cart now!
$18.96Out of stock -
T-Motor AIR 350 Multirotor Kit (with 4 Motors and 4 ESC)
This product is a 4-engine, 4 ESC and 4-wheel (2xCW + 2xCCW) T9545, all produced by T-Motor, a traditionally-produced manufacturer offering high quality products. The kit is right for you to build your own four-engine droning machine, a quadcopter, and is designed in principle for drones with a mass of 1200g - 1500g. See description for more details...
$158.16Out of stock -
Kit 4 x MN2213 950KV Motor and T9545 Propeller
Kit 4 x MN2213 950KV Motor and T9545 Propeller
$95.76Out of stock -
Mini Motor with Speed Encoder (Motor: 6 - 12 V, Encoder: 2 - 3.3 V)
1 Review(s)Mini Motor with Speed Encoder (Motor: 6 - 12 V, Encoder: 2 - 3.3 V)
$2.40Out of stock -
Wing FT3325M Mini Servomotor with Metalic Case
Wing FT3325M Mini Servomotor with Metalic Case See description for more details about the product. Add to cart now!
$43.20Out of stock -
Micro Servo Motor S0361 3.6 g / 45 kg / 12 sec
Small yet strong servo and rebuildable. See description for more details about the product. Add to cart now!
$6.00Out of stock -
Micro Pololu FEETECH FS90R Servomotor
The FS90R is a micro servo that has been built by FEETECH specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving, especially when paired with 60x8mm wheels designed specifically for this servo. This servo can work with both 5 V and 3.3 V servo signals. Key specs at 6 V: 130...
$9.36Out of stock -
Micro Servo Motor Pololu HD-1900A
The HD-1900A analog servo from Power HD is a great general-purpose micro servo. Servo horns and associated hardware are included. Key specs at 6 V: 0.08 sec/60°, 21 oz-in (1.5 kg-cm), 9.0 g. See description for more details about the product. Add to cart now!
$12.48Out of stock -
Micro Servo Motor Pololu FEETECH FS90
The FS90 analog servo from FEETECH is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included. This servo can work with both 5 V and 3.3 V servo signals. Key specs at 6 V: 0.10 sec/60°, 21 oz-in (1.5 kg-cm), 9.0 g. See description for more details about the product. Add to cart now!
$8.64Out of stock -
2.5 g Micro Servomotor
2.5 g Micro Servomotor See description for more details about the product. Add to cart now!
$7.68Out of stock -
GA12-N20 Micro Gearmotor 12GAN20-50 with 10 mm Long Shaft
This small and easy, but powerful motor reducer can be useful in building robots. See description for more details about the product. Add to cart now!
$6.00Out of stock -
Pololu HPCB Micro Motor 10:1 6 V
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. See description for more details about the product. Add to cart now!
$18.72Out of stock -
15:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 15.25:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 x 1 mm extended motor shaft. Key specifications: voltage no-load performance stall...
$16.32 $18.72Out of stock -
Pololu HPCB Micro Motor 298:1 6 V
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specifications: voltage no-load performance stall extrapolation 6 V 110 RPM, 100 mA 3.4 kg⋅cm (47...
$17.52 $18.72Out of stock -
380:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm...
$18.72Out of stock -
Pololu HPCB 75:1 6 V Micro Motor with Extended Axis
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 x 1 mm extended motor shaft. voltage no-load performance stall extrapolation 6 V...
$19.44 $21.84Out of stock -
3.7 g Micro Servomotor
3.7 g Micro Servomotor See description for more details about the product. Add to cart now!
$7.68Out of stock -
Micro 0.07sec/60degree 3.5kg.cm Digital Servo FT2331M
Micro 0.07sec/60degree 3.5kg.cm Digital Servo FT2331M See description for more details about the product. Add to cart now!
$48.00Out of stock
