Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
1 mm Red Wire, 100 m Roll See description for more details about the product. Add to cart now!
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. See Description for more details about the product. Don't delay, buy today. Add to cart now!
Maker Pi Pico (includes Raspberry Pi Pico soldered on board) Attention! This product includes the Raspberry Pi Pico already soldered onto the Maker Pi Pico board
This module is a carrier/breakout board for the ST LIS3MDL three-axis magnetometer. The sensor provides magnetic field strength measurements with a configurable range of ±4 gauss to ±16 gauss that can be read through a digital I²C or SPI interface. See description for more details about the product. Add to cart now!
Maker Pi Pico Attention! The Raspberry Pi Pico board is not included. You must purchase Raspberry Pi Pico with pins separately!
Maker Reflect - IR Reflectance Sensor
Metallic Conical Chuck See description for more details about the product. Add to cart now!
Threaded Metal Chuck See description for more details about the product. Add to cart now!
Fast Chuck See description for more details about the product. Add to cart now!
See description for more details about the product. Add to cart now!
Features SPI-Compatible Bus Interface: - 20 MHz Clock rate - SPI/SDI/SQI mode Low-Power CMOS Technology: Read Current: 3 mA at 5.5V, 20 MHz Standby Current: 4 µA at +85oC Unlimited Read and Write Cycles Zero Write Time See description for more details about the product. Add to cart now!
Features Single I/O Interface 16 Kbit Memory Densities 1.8-5.5V Operating Voltage 10-100 kHz Operating Frequency 1 Million Erase/Write Cycles Software Write Protect: ¼, ½, or Full Array See description for more details about the product. Add to cart now!
Features Single supply with operation down to 1.7V 2-wire serial interface, I2C compatible 100 kHz, 400 kHz, and 1MHz compatibility More than 1 million erase/write cycles Data retention >200 years See description for more details about the product. Add to cart now!
Features Single supply with operation down to 1.7V 2-wire serial interface, I2C compatible 100 kHz, 400 kHz, and 1MHz compatibility More than 1 million erase/write cycles Data retention >200 years See description for more details about the product. Add to cart now!
Features Single supply with operation down to 1.7V 2-wire serial interface, I2C™ compatible 100 kHz, 400 kHz, and 1 MHz clock compatibility More than 1 million erase/write cycles Data retention >200 years See description for more details about the product. Add to cart now!
Features Single-Supply with Operation down to 1.7V for24AA64/24FC64 devices, 2.5V for 24LC64devices Low-Power CMOS Technology:- Active current 3 mA, max.- Standby current 1 µA, max. 2-Wire Serial Interface, I2C™ Compatible Packages with 3 Address Pins are cascadable upto 8 devices Schmitt Trigger Inputs for Noise Suppression Output Slope Control...
The N20-12105 Micro-Motor is a double ring coreless motor. It is famous all over the world. Having a small size, it still has a remarkable performance. It has strong magnet, carbon brush, with cooling holes and the torque is very good. See Description for more details about the product. Add to cart now!
This micro motor has an integrated encoder that can measure the speed of the motor. Its shaft is compatible with 42x19 mm or 32x7 mm Polulu wheels. The input voltage is 6 V, the gear ratio is 1:10 and it has a maximum speed of 1550 RPM. See description for more details about the product. Add to cart now!
This micro motor has an integrated encoder that can measure the speed of the motor. Its shaft is compatible with 42x19 mm or 32x7 mm Pololu wheels. The input voltage is 6 V, the gear ratio is 1:100 and it has a maximum speed of 155 RPM. See description for more details about the product. Add to cart now!
Flat CAT7 shielded Ethernet Patch Cable are only a 2.2 mm thick that gives a plenty of ventilation room for network rack wiring. See description for more details about the product. Add to cart now!
58.5x58.5mm 8x8 RGB LED Matrix
The infrared sensor matrix has been specially designed to be easily integrated into the tracking robot construction. This array detects the black lines on a surface and eventual frontal collisions. See description for more details about the product. Add to cart now!
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
This ULN2003A Transistor Matrix is known for its high-current capacity that can be used in driver circuits for relay, lamps, and stepper motors. See description for more details about the product. Add to cart now!
8x8 RGB LED Matrix for Raspberry Pi
This super-cute 5x5 RGB LED matrix breakout is a neat way to visualise sensor data or for simple animations or notifications, and it's Raspberry Pi and Arduino-compatible. See Description for more details about the product. Add to cart now!
The MAX232CPE is an RS-232 driver/receiver intended for all EIA/TIA-232E and V 28/V 24 communications interfaces, and in particular, for those applications where a +12V is not available. The MAX232CPE is particularly useful in Battery-powered systems, since their low-power shutdown mode reduces power dissipation to less than 5uW. See description for more...
MC79L05ACLP IC, V REG -5.0V, 79L05, TO-92-3
See description for more details about the product. Add to cart now!
This micro motor has an integrated encoder that can measure the speed of the motor. Its shaft is compatible with 42x19 mm or 32x7 mm Polulu wheels. The input voltage is 6 V, the gear ratio is 1:210 and it has a maximum speed of 75 RPM. See description for more details about the product. Add to cart now!
Neodymium block magnet 20x10x1 with 3M tape See description for more details about the product. Add to cart now!
Neodymium Block Magnet 15x15x15 Thick N48 See description for more details about the product. Add to cart now!
Block Magnet 15x15x4 with Countersunk Borehole See description for more details about the product. Add to cart now!
Neodymium Block Magnet 15x15x5 Thick N38 See description for more details about the product. Add to cart now!
Neodymium Block Magnet 15x5x1 Thick N38 See description for more details about the product. Add to cart now!
Neodymium Block Magnet 15x5x5 Thick N38 See description for more details about the product. Add to cart now!
Neodymium Block Magnet 17x6x5 Thick N42 See description for more details about the product. Add to cart now!
Neodymium Block Magnet 20x10x1 Thick N38 See description for more details about the product. Add to cart now!