Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 8:30 - 17:30, pauza 12:30 - 13:30.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
All Products
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
-
FormFutura EasyWood Filament - Coconut, 1.75 mm, 2300 g
EasyWood is a wood-filled PLA-based...
357,58 lei 650,58 lei
All Products There are 6987 products.
-
SK20 Linear Axis Holder (ID 20 mm)
This SK20 linear axis holder is used to restrict an object to a single axis of motion.
12,99 lei 17,99 leiOut of stock -
SK20 Linear Axis Holder
This SK20 linear axis holder is used to restrict an object to a single axis of motion. See description for more details about the product. Add to cart now!
11,99 leiOut of stock -
8-1A Plastic Gear
This is a plastic gear for your RC toys, cars, airplanes, helicopters and DIY projects. See description for more details about the product. Add to cart now!
1,45 leiOut of stock -
SK16 Linear Axis Holder (ID 16 mm)
SK16 Linear Axis Holder (ID 16 mm)
9,99 lei 14,99 leiOut of stock -
Blue M0.5 Plastic Gear for 3 mm D Shaft
Plastic Gear is for toys spindle gear spare parts, suitable for DIY model technology production See description for more details about the product. Add to cart now!
3,49 leiOut of stock -
6xAA Battery Holder Box (Back-to-Back) Without Cover
Holds 6xAA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58 x 46 x 28 Weight: 15 gm Material: Plastic Internal Connection: Series See description for more details about the product. Add to cart now!
8,98 leiOut of stock -
Slampher: 433MHz RF&WiFi Smart Light Bulb Holder
Remote ON/OFF- Turn electrical devices on/off from anywhere RF Remote control- Turn on/off by 433MHz RF Remote indoors LAN Control- Turn on/off the device even when WiFi has no Internet access App Support- Free iOS and Android mobile App eWeLink Sync Status- Real-time device status provided to App Timing- Set scheduled/countdown timers to turn...
57,99 leiOut of stock -
GT2-6mm Belt Width 20 Teeth 5mm Bore Timing Pulley
Outer Diameter: 16mm Inner Diameter: 5mm High-Quality Aluminium Excellently Machined Durable and practical Minimizes the chance of the belt slipping See description for more details about the product. Add to cart now!
9,99 leiOut of stock -
516-2A Plastic Bevel Gear
516-2A Plastic Bevel Gear See description for more details about the product. Add to cart now!
1,25 leiOut of stock -
10-2A Metal Gear
10-2A Metal Gear See description for more details about the product. Add to cart now!
3,99 leiOut of stock -
-
28-1A Plastic Gear
This is a plastic gear for your RC toys, cars, airplanes, helicopters and DIY projects. See description for more details about the product. Add to cart now!
1,95 leiOut of stock -
-
24-2.5A Plastic Gear
This is a plastic gear for your RC toys, cars, airplane, helicopters and DIY projects. See description for more details about the product. Add to cart now!
1,45 leiOut of stock -
-
Red Raspberry Pi Drawstring Bag
See description for more details about the product. Add to cart now!
12,99 leiOut of stock -
-
ACHS-7123 Current Sensor Carrier -30A to +30A
This board is a simple carrier of Broadcom’s bidirectional ±30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V...
29,99 leiOut of stock -
Autoleveling Sensor for Tarantula 3D Printer
Autoleveling Sensor for Tarantula 3D Printer See description for more details about the product. Add to cart now!
99,00 leiOut of stock -
MS1100 Gas Concentration Sensor for Formaldehydes and Benzene
MS1100 Gas Concentration Senzor for Formaldehydes and Benzens See description for more details about the product. Add to cart now!
69,99 lei 99,99 leiOut of stock -
Non-invasive AC Current Sensor SCT-013 (100A max)
1 Review(s)Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
39,99 leiOut of stock -
Non-invasive AC Current Sensor SCT-013 (30A max)
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
55,00 leiOut of stock -
ACHS-7121 Current Sensor Carrier -10A to +10A
This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 10 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5...
44,99 leiOut of stock -
ACHS-7122 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered at 2.5...
29,99 leiOut of stock -
1.2MPa Stainless Steel Pressure Transducer Sensor
Adopts Precision Compensation Technology High Accuracy Sensor Suitable For Gas,Liquid,Oil Stainless Steel Body See description for more details about the product. Add to cart now!
99,00 leiOut of stock -
ACS709 Current Sensor (from -75 A to + 75 A)
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes...
99,99 leiOut of stock -
ACS711EX Current Sensor Carrier -15.5A to +15.5A
This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. See description for more details about the product. Add to cart now!
24,99 leiOut of stock -
ACS711EX Current Sensor (From -31 A To +31 A)
This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 31 A and outputs a proportional analog voltage centered at Vcc/2...
29,99 leiOut of stock -
ACS711LC Current Sensor Carrier -25A to +25A
This board is a simple carrier of Allegro’s ±25A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 25 A and outputs a proportional analog voltage centered at Vcc/2...
35,99 leiOut of stock -
Steam Sensor
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. See description for more details about the product. Add to cart now!
23,75 leiOut of stock -
0.2MPa Stainless Steel Pressure Transducer Sensor
Operating Voltage: 5V Output Voltage: 0.5~4.5V Accuracy: 1% FS Thread Size: G 1/4" See description for more details about the product. Add to cart now!
79,99 leiOut of stock -
ACS724 Current Sensor Carrier -5A to +5A
This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered...
84,00 leiOut of stock -
Sense HAT (B) for Raspberry Pi, Multi Powerful Sensors
Sense HAT (B) for Raspberry Pi, Multi Powerful Sensors See description for more details about the product. Add to cart now!
179,99 leiOut of stock -
MPL115A2 - I2C Barometric Pressure/Temperature Sensor
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. See description for more details about the product. Add to cart now!
38,95 leiOut of stock -
DW1: 433MHz RF Door Window Alarm Sensor
DW1: 433MHz RF Door Window Alarm Sensor
47,99 leiOut of stock -
ACS724 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Allegro’s bidirectional ±20A ACS724LLCTR-20AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered...
39,99 leiOut of stock -
ACS724 Current Sensor Carrier -50A to +50A
This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 50 A and outputs a proportional analog voltage (40 mV/A) centered...
113,99 leiOut of stock -
CMYcam5 Pixy Image Sensor
CMYcam5 Pixy Image Sensor See description for more details about the product. Add to cart now!
449,00 leiOut of stock -
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
HC-SR04P Ultrasonic Distance Sensor (3 - 5.5 V)
6,99 leiOut of stock -
US-026 Ultrasonic Distance Sensor (3 - 5.5 V)
US-026 is a high-performance, low-cost ultrasonic distance measurement module. The module adopts the cost-effective ultrasonic measurement module. It has distance chip CS100; ranging up to 6 meters or more, with high ranging accuracy; good measurement consistency, stable and reliable ranging. See Description for more details about the product. Add to...
6,99 leiOut of stock -
GP2Y0A21YK0F 10-80 cm Infrared Distance Sensor
The GP2Y0A02YK0F has an analog output ranging from 0.4 V to 2.8 V at 10 cm to 80 cm, with an input voltage of 4.5 to 5.5 V DC. The sensor comes with a JST standard. See description for more details about the product. Add to cart now!
66,95 leiOut of stock -
APDS-9960 RGB Gesture Sensor
This RGB and Gesture Sensor, a small breakout board with a built-in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! See description for more details...
14,99 leiOut of stock -
Tilt Sensor
This is a SW-520D tilt sensor module with 20 cm DuPont cable. See description for more details about the product. Add to cart now!
3,85 leiOut of stock -
Auto-Calibrating Line Sensor
Auto-Calibrating Line Sensor See description for more details about the product. Add to cart now!
84,00 leiOut of stock -
-
ACS724 Current Sensor Carrier 0 to 10A
This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 10 A and outputs a proportional analog voltage (400 mV/A) that measures 500 mV...
39,99 leiOut of stock -
INA3221 Triple Low/High Side Current Sensor Module with I2C Interface
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. See description for more details about the product. Add to cart now!
74,99 leiOut of stock -
ACS724 Current Sensor Carrier 0 to 30A
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
39,99 leiOut of stock
