Comenzile cu ridicare personala pot fi ridicate fara plata taxei de urgenta atunci cand statusul acestora a fost schimbat pe "Pregatit"
Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Restrictia la baterii si acumulatori a fost eliminata. Acum se vand baterii și acumulatori si catre persoane fizice.
No products
Filamente
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
- Filamente
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- Plăci ODROID
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Plăci Pycom
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Games and Toys
- Resealed
- Storage systems
- Flotilla modules
-
Sakata 3D Ingeo 3D850 PLA Fluorescent Filament - Quartz Orange 1.75 mm 1 kg
QUARTZ-850 is the new family or our...
72,99 lei 119,00 lei
Filamente There are 479 products.
-
Devil Design PLA Black Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
73,99 leiIn Stock -
colorFabb PLA/PHA Filament - Standard Black 750 g 1.75 mm
The absolute favorite and must-have for everyone’s filament portfolio; Standard Black. By far the most popular 3d printing color in our portfolio. There’s something about black 3d prints that just make the parts look really nice. If you can’t decide on color than you’ll always have Standard Black to rely on.
113,99 leiIn Stock -
colorFabb PLA/PHA Filament - Standard White 750 g 1.75 mm
Neutral but definitely not boring, our standard white is one of those essential filaments for every maker out there. Our standard white is just a tad creamy giving your prints a warm and classic appeal. Looking for a colder type of white? Try our blueish white!
113,99 leiIn Stock -
1.75 mm, 1 kg ABS Filament For 3D Printer - Light Gold
1.75 mm, 1 kg ABS Filament For 3D Printer - Light Gold
57,99 leiIn Stock -
Spectrum PLA Filament - Deep Black (RAL 9017) 1.75 mm 1 kg
Using Spectrum PLA Filament your 3D model will obtain: warping resistance durability and stability of printout high quality See description for more details about the product. Add to cart now!
74,99 leiIn Stock -
PLA Natural Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
59,99 leiIn Stock -
Sakata 3D Ingeo 3D850 PLA Filament - Black 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details about...
72,99 lei 119,00 leiReduced price!In Stock -
1.75 mm, 1kg PLA Filament For 3D Printer - Silver
PLA easily print and has a low melting point December à t of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
60,99 leiIn Stock -
Sakata 3D Ingeo 3D850 PLA Filament - White 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details about...
72,99 lei 119,00 leiReduced price!In Stock -
1.75 mm, 1kg PLA Filament For 3D Printer - Orange
PLA easily print and has a low melting point December à t of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
57,99 leiIn Stock -
ColorFabb nGen_Lux Filament - Champagne Gold 750 g 1.75 mm
This pale shade of gold reminds of the subtle and unmistakably beautiful color of champagne. It’s elegant and classy and will add instant luxury to any 3D printing project.
316,99 leiIn Stock -
Filament PLA 1.75mm ARCTIC WHITE 1kg
PLA is one of the two most commonly used 3D printing materials. It is fully biodegradable and therefore environmentally friendly. PLA is useful in a wide range of printing applications. It has a significant advantage - the odorlessness. PLA is a material that succeeds in printing durable, decorative and solid printouts. In addition, it's easy to print -...
112,31 leiIn Stock -
1.75 mm, 1 kg PLA Filament For 3D Printer - Extra Black
3 Review(s)PLA easily print and has a lower melting point than of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
59,99 leiIn Stock -
1.75 mm, 1 kg ABS Filament For 3D Printer - Color Of The Wood
1.75 mm, 1 kg ABS Filament For 3D Printer - Color Of The Wood
69,99 leiIn Stock -
1.75 mm, 1kg PLA Filament For 3D Printer - Extra White
1 Review(s)PLA easily print and has a low melting point December à t of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
59,99 leiIn Stock -
HT ColorFabb Black 1.75 mm 700 g
A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.
154,99 leiIn Stock -
HT ColorFabb White 1.75 mm 700 g
This is not an off-white color, but the most intense white we could achieve.
154,99 leiIn Stock -
ColorFabb XT Filament - White 1.75 mm 750 g
Color is important for most 3d printing projects, which is why we’ve decided to bring color to our colorFabb_XT line of filament! The colorFabb_XT co-polyester range, made with Eastman Amphora™ 3D polymer, is now available in many vibrant colors.
147,99 leiIn Stock -
1.75 mm, 1kg PLA Filament For 3D Printer - Yellow
PLA easily print and has a low melting point December à t of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
59,99 leiIn Stock -
Devil Design PLA White Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant
73,99 leiIn Stock -
ColorFabb PLA/PHA Filament - Traffic Red 750 g 1.75 mm
Bright red like the traffic lights causing everything and everyone to stop right in its tracks. Whether your 3d printing a demon from hell or an Italian sports car, our Traffic Red will not disappoint.
113,99 leiIn Stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Black 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials.
88,99 lei 139,00 leiReduced price!In Stock -
ColorFabb XT Filament - Black 1.75 mm 750 g
Color is important for most 3d printing projects, which is why we’ve decided to bring color to our colorFabb_XT line of filament! The colorFabb_XT co-polyester range, made with Eastman Amphora™ 3D polymer, is now available in many vibrant colors.
147,99 leiIn Stock -
Devil Design PLA Gray Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
73,99 leiIn Stock -
Devil Design PLA Yellow Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
73,99 leiIn Stock -
Green 3D Printer Filament - 1.75 mm PLA 1 kg
Green 3D Printer Filament - 1.75 mm PLA 1 kg
57,99 leiIn Stock -
ColorFabb PLA/PHA Filament - Ultra Marine Blue 750 g 1.75 mm
During the Renaissance, ultramarine was the most expensive pigment a painter could use. Our color inspired by the original ultramarine blue will make you 3d prints look super classy. Since our Ultramarine blue is also ever so slightly translucent, it reminds of gemstones and how they play with the light.
113,99 leiIn Stock -
ColorFabb nGen Filament - White 750 g 1.75mm
Like fresh winter snow, this white is pure and bright. For high-quality prints that need to show every detail, this white does the job. This is not an off-white color, but the most intense white we could achieve.
113,99 leiIn Stock -
ColorFabb nGen_Lux Filament - Star Yellow 750 g 1.75 mm
A bright yellow gold, with loads of sparkly goodness that seems to be forged inside a star. A highly visible color that looks great from afar and even better up close. This might be the brightest yellow gold we’ve seen in a filament.
316,99 leiIn Stock -
ColorFabb nGen_Lux Filament - Nature Green 750 g 1.75 mm
Green means positive. Green means life. Green means nature. Bring an extraordinary and unique look to your creations. This shade of green is a mix of the most amazing emerald green and a decent amount of what looks like fairy dust.
316,99 leiIn Stock -
ColorFabb PA-CF Carbon Fiber Low Warp Filament 750 g 1.75 mm
The PA-CF Low Warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non-heated build platforms. PA-CF Low Warp excels in tensile and impact strength and allows continues use at 120°C while retaining sufficient mechanical properties. /p>
315,99 leiIn Stock -
Devil Design PLA Red 1 kg Filament, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
73,99 leiIn Stock -
Devil Design TPU White Flexible Filament, 1.75 mm
TPU filament has a very good weldability layer, high durability mechanical stretching, crushing and abrasion, and is resistant to oils.
139,00 leiIn Stock -
Spectrum PLA Pro Filament - Deep Black 1.75 mm 1 kg
PLA Pro combines two desired features: ease of printing as with normal PLA material while keeping properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% greater impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring...
157,05 leiIn Stock -
ColorFabb nGen Filament - Black 750 g 1.75 mm
A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish to the prints, an aesthetic quality that keeps stunning people who see the results.
113,99 leiIn Stock -
PLA Filament "brass" color, 1.75 mm, 1 kg, metal filling composition
VERSATILE & EASY TO USE PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for various 3D printers. It has no odor, a lower melting point and good flowability, no need to post-treatment The surface shows a metal texture after polishing
169,00 leiIn Stock -
PLA Filament Copper, 1.75 mm, 1 kg (copper color metal filling composition)
VERSATILE & EASY TO USE. PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for various 3D printers. It has no odor, a lower melting point and good flowability, no need to post-treatment. The surface shows a metal texture after polishing
149,00 leiIn Stock -
Devil Design PLA Gold Colored Filament 1 kg, 1.75 mm
Filament coiled on a bobbin vacuum-packed together with a desiccant.
73,99 leiIn Stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - White 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials.
88,99 lei 139,00 leiReduced price!In Stock -
ColorFabb XT Filament - Red 1.75 mm 750 g
Color is important for most 3d printing projects, which is why we’ve decided to bring color to our colorFabb_XT line of filament! The colorFabb_XT co-polyester range, made with Eastman Amphora™ 3D polymer, is now available in many vibrant colors.
147,99 leiIn Stock -
Sakata 3D Ingeo 3D850 PLA Filament - Silver 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details about...
72,99 lei 119,00 leiReduced price!In Stock -
PrimaSelect PVA HT (High Temp) - 1.75mm - 500 g - Natural
PrimaSELECT PVA HT (polyvinyl alcohol) is a water soluble material that´s most often used as a support material. PVA prints translucent with a slightly yellow tint. It is most often used on 3D printers with dual extruders, with one extruder printing a primary material (such as ABS or PLA) and the other printing this easily-dissolved material to provide...
199,00 leiIn Stock -
-
Sakata 3D Ingeo 3D850 PLA Filament - Red 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details about...
72,99 lei 119,00 leiReduced price!In Stock -
-
1.75 mm, 1kg PLA Filament For 3D Printer - Pink
PLA easily print and has a low melting point December à t of other materials. PLA is not a toxic material. It is a material that can print high-resolution models.
57,99 leiIn Stock -
PrimaSelect NylonPower Carbon Fibre - 1.75mm - 500g
Material: Carbon fiber reinforced Nylon Diameter: 1.75mm Tolerance: ± 0.05 mm Heated build platform required: Yes, 60 - 70° C Print Temperature: 250 - 265° C Recommended Print Speed: 40 mm/s Weight Filament: 500 grams Total lenght on spool: - Spool Size: 200 x 55 mm Spool Hub Diameter: 53 mm Empty spool weight: -
289,00 leiIn Stock -
PrimaSelect NylonPower Glass Fibre - 1.75mm - 500g
Essential Data: Material: Glass fiber reinforced Nylon Diameter: 1.75mm Tolerance: ± 0.05 mm Heated build platform required: Yes, 60 - 70° C Print Temperature 250 - 265° C Recommended Print Speed: 40 mm/s Weight Filament: 500 grams Total length on spool: - Spool Size: 200 x 55 mm Spool Hub Diameter:53 m Empty spool weight: -
289,00 leiIn Stock
