Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
WOOW !!! Livrare gratuita la locker Easybox pentru comenzi mai mari de 98 RON !
No products
Filaments
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
-
Adafruit 12 Channels Capacitive Touch Shield for Arduino - MPR121
This touch-able add on shield for...
54,13 lei 74,99 lei
Filaments There are 665 products.
-
Sakata 3D Ingeo 3D850 PLA Filament - White 1.75 mm 1 kg
1 Review(s)SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 lei 136,00 leiReduced price!Out of stock -
Sakata 3D Ingeo 3D850 PLA Filament - White 1.75 mm 500 g
High resolution, premium filament. Easy to mould, print and engrave. High rigidity and low contraction rate. Recommended temp.: 190o-220oC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers Hotend temp. : 190o-220oC Heated bed temp. : not needed Printing speed : max 200mm/s Diameter tolerance +/- 0.03 mm Compatible with all FDM...
54,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Ivory 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Blue 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 lei 136,00 leiReduced price!Out of stock -
PLA Ingeo 3D850 Militar 1 GC, 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Silk Wine 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
84,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Silver 1.75 mm 500 g
High resolution, premium filament. Easy to mould, print and engrave. High rigidity and low contraction rate. Recommended temp.: 190o-220oC Diameter variability: +/- 0.03mm Compatible with all FDM printers Heated bed temp. : not needed Printing speed : max 200mm/s See description for more details about the product. Add to cart now!
54,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Magic Silver 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 lei 136,00 leiReduced price!Out of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Magic Silver 1.75 mm 500 g
High resolution, premium filament. Easy to mold, print and engrave. High rigidity and low contraction rate. Recommended temp.: 190o-220oC Diameter variability: +/- 0.03mm Compatible with all FDM printers Heated bed temp. : not needed Printing speed : max 200mm/s See description for more details about the product. Add to cart now!
54,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Gold 1.75 mm 500 g
High resolution, premium filament. Easy to mold, print and engrave. High rigidity and low contraction rate. Recommended temp.: 190o-220oC Diameter variability: +/- 0.03mm Compatible with all FDM printers Heated bed temp. : not needed Printing speed : max 200mm/s See description for more details about the product. Add to cart now!
54,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Gold 2.85 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
84,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Clay 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 lei 136,00 leiReduced price!Out of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Sand 1.75 mm 1 kg
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
89,99 leiOut of stock -
Sakata 3D Ingeo 3D850 PLA Filament - Silk Wine 1.75 mm 500 g
SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. This filament exhibits fast crystallization rates and is able to develop improved heat resistance in 3D printed parts. • High resolution, premium filament. • Easy to mold, print and engrave. • High rigidity and low contraction rate. See description for more details...
49,99 lei 79,99 leiReduced price!Out of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Green 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Filament Sakata 3D ORANGE GLASS PLA 850 1.75 mm 1 kg
The new GLASS Family is caracterized by its translucent colours Unlike general-purpose PLA, PLA 850 exhibits higher crystallization rate, temperature resistance, and mechanical properties. Thanks to its good adherence to the bed and its low shrinkage capacity, it allows to obtain pieces with excellent definition.
89,99 leiOut of stock -
ABS-E Orange 1.75 mm 1 kg
ABS filament. Manufactured in Spain and highly impact-resistant. Recommended temperature: 220º-245ºC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers. See description for more details about the product. Add to cart now!
119,00 leiOut of stock -
ABS-E RED 1.75 mm 1 Kg
ABS filament. Manufactured in Spain and highly impact-resistant. Recommended temperature: 220º-245ºC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers. See description for more details about the product. Add to cart now!
64,40 lei 119,00 leiOut of stock -
ABS-E Teja 1.75 mm 1 Kg
ABS filament. Manufactured in Spain and highly impact-resistant. Recommended temperature: 220º-245ºC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers. See description for more details about the product. Add to cart now!
119,00 leiOut of stock -
ABS PINK 1.75 mm 1 Kg
ABS filament. Manufactured in Spain and highly impact-resistant. Recommended temperature: 220º-245ºC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers. See description for more details about the product. Add to cart now!
119,00 leiOut of stock -
ABS-E Green 1.75 mm 1 kg
ABS filament. Manufactured in Spain and highly impact-resistant. Recommended temperature: 220º-245ºC. Diameter variability: +/- 0.03mm. Compatible with all FDM printers. See description for more details about the product. Add to cart now!
119,00 leiOut of stock -
Filament Sakata 3D BLUE GLASS PLA 850 1.75 mm 1 kg
The new GLASS Family is caracterized by its translucent colours Unlike general-purpose PLA, PLA 850 exhibits higher crystallization rate, temperature resistance, and mechanical properties. Thanks to its good adherence to the bed and its low shrinkage capacity, it allows to obtain pieces with excellent definition.
89,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - White 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Red 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Blue 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Silver 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Grey 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Black 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
Sakata 3D Ingeo 3D870 HR PLA Filament - Orange 1.75 mm 1 kg
Ingeo 3D870 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. See description for more details about the...
99,99 leiOut of stock -
PrimaSelect PETG - 1.75mm - 750 g - Transparent Blue
Material: PETG Color: Transparent Blue Diameter: 1.75 mm Tolerance: ±0.05 mm Heated build platform required: No Print temperature: 195 - 235 °C Weight filament: 750 g Spool size: 200 x 55 mm Spool hub diameter: 53 mm
119,00 lei 149,00 leiOut of stock -
Devil Design PET-G Filament - Blue Transparent 1 kg, 1.75 mm
PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing. See description for more details about the product. Add to cart now!
98,99 leiOut of stock -
Taulman T-Glase PETT Red 1.75mm Filament
Taulman3D has released another high strength material. One for those users that print mostly with PLA or lower temperature 3D Printers. This new material is called t-glase (tee glass) short for tough glass. See description for more details about the product. Add to cart now!
139,00 lei 199,00 leiOut of stock -
Taulman Bridge Nylon - 1.75 mm - 1 kg - Natural
taulman3D is today releasing a new high strength Nylon co-polymer to testers around the world for review. The new material is named "Bridge" as it is a consolidated effort by thousands of nylon 618 and nylon 645 users along with the help and support of both our extrusion house and chemical company. See description for more details about the product. Add...
249,00 leiOut of stock -
Devil Design PET-G Filament - Transparent 1 kg, 1.75 mm
PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing. See description for more details about the product. Add to cart now!
93,99 leiOut of stock -
Devil Design PET-G Filament - Bright Yellow Transparent 1 kg, 1.75 mm
PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing. See description for more details about the product. Add to cart now!
84,99 leiOut of stock -
Devil Design PET-G Filament - Ruby Red Transparent 1 kg, 1.75 mm
PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing. See description for more details about the product. Add to cart now!
93,99 leiOut of stock -
Devil Design PET-G Filament - Green Transparent 1 kg, 1.75 mm
Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method. See description for more details about the product. Add to cart now!
117,96 leiOut of stock -
Devil Design PET-G Filament - Bright Green Transparent 1 kg, 1.75 mm
PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing. See description for more details about the product. Add to cart now!
93,99 leiOut of stock -
Taulman T-Glase PETT Black 1.75mm Filament
Ttaulman3D has released another high strength material. One for those users that print mostly with PLA or lower temperature 3D Printers. This new material is called t-glase (tee glass) short for tough glass. See description for more details about the product. Add to cart now!
139,00 lei 199,00 leiOut of stock -
Spectrum Premium PLA Filament - Lavender Violet 1.75 mm 1 kg
Using Spectrum PLA Filament you 3D model will obtain: warping resistance durability and stability of printout high quality See description for more details about the product. Add to cart now!
92,31 lei 112,31 leiOut of stock -
Filament PLA Pro 1.75mm SILVER METALLIC 1kg
PLA Pro combines two desired features: ease of printing as with normal PLA material while keeping properties comparable to ABS. Filament Spectrum PLA Pro, after printing, exhibits almost 50% greater impact strength than ABS material. Therefore, when printing from Spectrum PLA Pro, we avoid any difficulties such as: shrinkage or unpleasant odors occurring...
147,99 lei 197,99 leiReduced price!Out of stock
