Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000007353
New product
High gain audio amplifier based on the LM386 integrated circuit.
See Description for more details about the product.
Add to cart now!
263 Item Items
Warning: Last items in stock!
Availability date:
1. Power up the audio amplifier.
The module is powered with a voltage between 5 V and 12 V. The supply pins are marked with VCC and GND. On the module are marked 2 pins with GND, but it does not matter which pin you connect the table.
2. Connect a speaker to the mode.
On the opposite side of the module, there are two screw terminals useful for connecting a speaker with a 8Ω impedance.
3. Connect an audio signal source.
The audio input is made through the pins marked with IN and GND. If the audio signal and the power supply come from a common source (for example: an Arduino development board), you need to connect a single mesh wire (GND).
The module connects to the development board:
This 24 mm arcade button red LED is ideal for...
9,99 lei
This module is very useful in detecting sound...
5,50 lei
ACS712 30 A Current Sensor See description for...
11,50 lei
Original Product Raspberry Pi Pico W is a...
34,50 lei
Sensor Shield Expansion Board See description...
11,30 lei
MD-PS002-150KPa pressure sensor operates at 5 V...
12,42 lei
These breakable 1 x 40 female pin headers are...
1,49 lei
Cynel Solder 100 g 1 mm
44,62 lei
TPA3110D2 Audio Amplifier Module (2 x 15 W)...
13,99 lei
LA4705-SAN - Amplifier 2 x 25 W / 4E 16 V
14,99 lei