Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
The sticky T433 86 type wall panel...
Max Output Current: 12 V Maximum Output Current: 3A Conversion efficiency: can up to 97.5% Switch frequency: 500KHz Operating temperature: Industrial grade (-40 ° to + 85 °) Improve conversion efficiency See description for more details about the product. Add to cart now!
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes...
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2...
This is a plastic gear for your RC toys, cars, airplanes, helicopters and DIY projects. See description for more details about the product. Add to cart now!
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 8 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital...
3.95'' LCD for Raspberry Pi
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
This 100 W LED with 3000 K to 3500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects. See description for more details about the product. Add to cart now!
This 8520 DC motor has 47000 RPM speed at a low voltage of 3.7 V. Typically used for quadcopters and other similar toy aircrafts. See description for more details about the product. Add to cart now!
XT60 Male to T Male Connector See description for more details about the product. Add to cart now!
This SK20 linear axis holder is used to restrict an object to a single axis of motion.
V-Slot Black Aluminium Profile 2 x 2 x 150 cm Weight: 666.5 g
Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! See description for more details about the product. Add to cart now!
Flexible jumper wire for breadboard or other electronic test or measurement. See description for more details about the product. Add to cart now!
Soldering Iron 60W 2 mm B3-2 Spare Tip See description for more details about the product. Add to cart now!
FTP Cat6 Patch Cord, Gray, 0.5 m See description for more details about the product. Add to cart now!
This soil moisture sensor is used to read the amount of moisture present in the soil surrounding the probe. It is ideal for monitoring the soil moisture in your urban garden and to detect the moisture content of the soil for your indoor flower pots. See Description for more details about the product. Add to cart now!
Red Digital Thermometer with Temperature Alarm (-60 ~ 125oC, 12 V) See description for more details about the product. Add to cart now!
Technical parameters Specification model: XH-W1315 Input model: DC 24V Temperature control range: -30 ~ 999 oC Temperature control type: position control Measurement input: K-type thermocouple Resolution:1 oC Temperature measurement accuracy: +/-2 oC Output type: 1 relay output Size: 75x54x21 mm See description for more details about the...
8p 1.25 mm Horizontal Connector See description for more details about the product. Add to cart now!
Neodymium Disc Magnet 5x7 Thick N38 Gold-plated See description for more details about the product. Add to cart now!
LEDs are used in variety of applications. High brightness LED is ideal for decorative and interior lighting, backlighting, automotive lighting and new consumer products like flash for camera phones or compact projectors. See description for more details about the product. Add to cart now!
SD Card Reader with USB and Micro USB - Blue See description for more details about the product. Add to cart now!
Model: SW-520D Product: Vibration Sensor Max voltage: 20V Max Current: 30mA Contact Resistance: < 10-ohm Insulation See description for more details about the product. Add to cart now!
MT2206 Brushless Motor With Banana Plugs (Forward Locking, 2300 KV) for aeromodelling projects or RC cars that require a large number of revolutions per minute. See description for more details about the product. Add to cart now!
ADUM1201 is a small magnetic isolator module which makes it an easy tool to add on your project. It is compatible with both 5 V and systems with 3.3 V, the module is ideal for any application. See Description for more details about the product. Add to cart now!
Sonoff RF switch is a Sonoff version with a 433MHz RF receiver module inside. This wireless switch can be used together with the RF remote controller, which enables you to control appliances in indoor environment. See description for more details about the product. Add to cart now!
UTP Cat6 Patch Cord, 0.5 m See description for more details about the product. Add to cart now!
Output signal: UART / PWM Target Gas: CO2 Size(L*W*H):33 x 20 x 9 mm See description for more details about the product. Add to cart now!
Raspberry Pi 4/4GB Desktop Kit See description for more details about the product. Add to cart now!
Neodymium Disc Magnet 16x2 Thick N38 See description for more details about the product. Add to cart now!
Neodymium Disc Magnet 20x1 Thick N38 See description for more details about the product. Add to cart now!
Genuine Product The IQaudIO DAC+ is a HAT add-on accessory for the Raspberry Pi. It is compatible with Raspberry Pi A+/B+/Raspberry Pi 2/Raspberry Pi 3/Raspberry Pi 4, no soldering is required. See description for more details about the product. Add to cart now!
Model: PCT-223-6 Rated Voltage: 600V Rated Impulse Voltage: 4KV Material of Insulation: Modified Nylon (PA66) Color: Grey+Orange Rated Current: 32A Gauge: 28~12AWG See description for more details about the product. Add to cart now!
Red-Blue Panel Voltmeter and Amperemeter 0-100 V, 50 A without Shunt See description for more details about the product. Add to cart now!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 248.98:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. See description for more details about the product. Add to cart now!
NRF24L01 Module with Serial Communication Adapter See description for more details about the product. Add to cart now!
The ADXL345 (Optimus Electric) module is a small, 3-axis thin accelerometer with high-resolution measurements See description for more details about the product. Add to cart now!
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. See description for more details about the product. Add to cart now!
USB to RS485 Converter See description for more details about the product. Add to cart now!
This 30 W LED with 3000 K to 3500 K color temperature is widely used in various electronic products. It is ideal to use as LED light in your projects. See Description for more details about the product. Add to cart now!
This is a LTC3780 DC-DC Buck Boost Converter which is very useful in building adjustable power voltage for your projects. See description for more details about the product. Add to cart now!
Standard Servomotor Wheel with Continuous Rotation
Power Cord (C13), VDE Approved, 6 ft See description for more details about the product. Add to cart now!