Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
You can easily print with this PLA...
Viewed products
Blue Digital Thermometer with...
Insulating Tape PVC See description for more details about the product. Add to cart now!
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. See Description for more details about the product. Add to cart now!
1.75 mm, 1 kg PLA Silk Gloss Filament for 3D Printer - Light Blue See description for more details about the product. Add to cart now!
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom...
Features Internal 64MHz oscillator Operating Voltage Range:- 1.8V - 5.5V CRC with Memory Scan Windowed Watchdog Timer (WWDT) See description for more details about the product. Add to cart now!
Features Single supply with operation down to 1.7V 2-wire serial interface, I2C compatible 100 kHz, 400 kHz, and 1MHz compatibility More than 1 million erase/write cycles Data retention >200 years See description for more details about the product. Add to cart now!
Features Single supply with operation down to 1.7V 2-wire serial interface, I2C™ compatible 100 kHz, 400 kHz, and 1 MHz clock compatibility More than 1 million erase/write cycles Data retention >200 years See description for more details about the product. Add to cart now!
Features Single I/O Interface 16 Kbit Memory Densities 1.8-5.5V Operating Voltage 10-100 kHz Operating Frequency 1 Million Erase/Write Cycles Software Write Protect: ¼, ½, or Full Array See description for more details about the product. Add to cart now!
Features Peripheral Pin Select (PPS) MSSP(SPI/I2C) 1x 8-bit Timer (TMR2) 2x Capture, Compare, PWM (CCP) See description for more details about the product. Add to cart now!
The device achieves up to 20 MIPS throughput at 20 MHz at 1.8-5.5V operation. See description for more details about the product. Add to cart now!
The device operates between 1.8-5.5 volts. See description for more details about the product. Add to cart now!
Features Peripheral Pin Select (PPS) MSSP(SPI/I2C) 1x 8-bit Timer (TMR2) 2x Capture, Compare, PWM (CCP) See description for more details about the product. Add to cart now!
The device operates between 1.8-5.5 volts. See description for more details about the product. Add to cart now!
The device operates between 1.8-5.5 volts. See description for more details about the product. Add to cart now!
The device operates between 1.8-5.5 volts. See description for more details about the product. Add to cart now!
A vibrant 1.14" IPS LCD screen for your Raspberry Pi Pico, with four useful buttons and a RGB LED! See description for more details about the product. Add to cart now!
Wide voltage power supply (6~30V). Supports micro USB 5.0V power supply. The interface is clear and simple, powerful, easy to understand. All set parameters automatically save power. See description for more details about the product. Add to cart now!
Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 100 ~ 240V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of the EMC and Safety Test See description for more details about the product. Add to cart now!
1.3inch OLED (B) See description for more details about the product. Add to cart now!
7inch Capacitive Touch IPS Display for Raspberry Pi, DSI Interface, 1024×600 See description for more details about the product. Add to cart now!
Continuous Discharging Current: 60A Charging Voltage: 54.6V Maximum Over-current Protection: 170A Balance Voltage with single-cell: 4.2V Overcharge detection voltage: 4.25V See description for more details about the product. Add to cart now!
Stretchable pure copper clip, higher conduction efficiency, with spring on the front end, strong elastic force, can hold testing point firmly. See description for more details about the product. Add to cart now!
Outer Diameter: 13mm Inner Diameter: 4mm High-Quality Aluminium Excellently Machined Durable and practical Minimizes the chance of the belt slipping See description for more details about the product. Add to cart now!
IC Chip: SP3232E Operating Voltage: 3.0V – 5.5V Pre-assembled compact size board Suitable for use with most microcontrollers ESD enhanced Hardware flow control supported See description for more details about the product. Add to cart now!
Maximum Power Point Tracking (MPPT) Solar Charger Module 2-Pin JST Connectors for Solar Panel and Battery Connection PWM Switching Frequency of 300KHz Maximum Charging Current of 2A See description for more details about the product. Add to cart now!
Provides Multiple Output Good-Quality Construction Supports two 18650 Li-ion cells See description for more details about the product. Add to cart now!
Meet UL, CE requirements Ultra-thin, ultra-small Input Voltage Range(V): 100 ~ 240 Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test See description for more details about the product. Add to cart now!
Input voltage: 8 to 60V Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current) Output voltage: 12 – 97V continuously adjustable Output Current: 35A MAX, See description for more...
Print smoothly No odor Forming stability See description for more details about the product. Add to cart now!
Color Classification: SBR12LUU extended slider Rolling bearing housing material: Bearing Steel Whether Standard Parts: Standard Parts See description for more details about the product. Add to cart now!
Metallic Block for E3D v6 3D Print Head
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 16 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital...
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 12 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 2 A and 3.3 A, depending on the input voltage, which makes it well suited for powering moderate loads like sensors or...
Features Universal panel installation With data lock Wide temperature range Support control heating/cooling With high temperature alarm See description for more details about the product. Add to cart now!
Simple Plated Wiring 100 x 75 mm
Aluminium V-Slot Profile 2040 (100 cm)
RT-553SA DC Motor (21000 RPM at 220 VDC) See description for more details about the product. Add to cart now!
JGB37-520 Gearmotor with Encoder and Wheel (6 V, 90 RPM)
Ethernet Expansion for Onion Omega
The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. See description for more details about the product. Add to cart now!
Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways. See description for more details about the product. Add to cart now!
MC33886 is an H-bridge driver, ideal for controlling the power of a bi-directional DC motor. It is capable of controlling a motor with loads up to 5A. It also has a PWM with maximum frequencies of 10 kHz. See description for more details about the product. Add to cart now!
This micro motor has an integrated encoder that can measure the speed of the motor. Its shaft is compatible with 42x19 mm or 32x7 mm Pololu wheels. The input voltage is 6 V, the gear ratio is 1:100 and it has a maximum speed of 155 RPM. See description for more details about the product. Add to cart now!
This micro motor has an integrated encoder that can measure the speed of the motor. Its shaft is compatible with 42x19 mm or 32x7 mm Polulu wheels. The input voltage is 6V, the gear ratio is 1:30 and it has a maximum speed of 530 RPM. See description for more details about the product. Add to cart now!
Compressed Air Duster, 400 ml See description for more details about the product. Add to cart now!