Filament PLA - thermoplastic polyester in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Filament PLA - thermoplastic polyester in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.
|Diameter of filament||1.75 mm / 2.85 mm|
|Dimensional tolerance of filament||+/- 0.05 mm|
|Roundness of filament||+/- 0.02 mm|
|Surface of the material||Gloss|
|Shrinkage of the material||Very low|
|Product weight||1.0 kg net, 1.36 kg gross|
|Spool - material||Transparent polycarbonate|
|Weight of the empty spool||~250 g|
|The diameter of the spool||200 mm|
|Width of spool||~70 mm|
|Diameter of mounting hole||52 mm|
|Package size||~205x205x80 mm|
|Cooling the printout||Recommended|
Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally
1.75 mm, 1 kg PLA Filament For 3D Printer -...
PETG is a non-toxic, clear and durable printing...
1.75 mm, 1 kg ABS Filament For 3D Printer -...
PLA easily print and has a low melting point...
REFILL-850 is our INGEO 850 packaged for the...
ASA is a printing material similar to ABS, but...
This Damping spring for 3D Printer is suitable...