W2020 Temperature Controller Module (12 V, 10 A) View larger

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

W2020 Temperature Controller Module (12 V, 10 A)

0104110000054487

New product

Features

  • intelligent control
  • precise temperature control
  • alarm function


See description for more details about the product.

Add to cart now!

More details

10 Items

79,99 lei
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

Add to wishlist

More info

Technical data

• Model: XH-W2020

• Supply voltage: DC 12V

• Output voltage: equal to input voltage

• Output current: MAX 10A

• Maximum Power: 120W

• Temperature control range: -50 ~ 110 ℃

• Control accuracy: 0.1 ℃

• Refresh rate: 4 times/sec

• Display size: 0.56 inch

• Size: 75x35x85 mm

• Net wight: 162g


Use Instructions

1. Connect the power supply in the input terminal and the load in the output terminal.

2. After powering on, the screen will display the real-time temperature. Press the SET key to set the stopping temperature, using UP/DOWN buttons. After you adjust the desired temperature, confirm it by pressing the RST key.

3. Press and hold for about 5 seconds the SET key to enter in the internal functions menu. If you want to restore to the factory settings, press and hold both UP and DOWN buttons.


Internal functions menu

Code Description Setting range Default value
P0 Working mode C/H C
P1 Hysteresis 0.1 - 30 o 2
P2 MAX temperature setting range 110 oC 110 oC
P3 MIN temperature setting range -50 oC -50 oC
P4 Temperature correction -10.0 ~ 10.0 0
P5 Delay start time 0 - 10 min 0
P6 High temperature alarm -50 ~ 110 oC OFF
P7 Data lock ON/OFF OFF
P8 Reset ON/OFF OFF

P0 cooling and heating mode

High temperature start for cooling mode, please set to C

Low temperature start for heating mode, please set to H


P1 hysteresis setting

In heating mode (H): measured value ≤ set value - start output heating to set value stop when returning

In cooling mode (C), when the measured value ≥ set value + hysteresis, the output cooling is started to the set value stop.


P2 limits the maximum setting (non-temperature setting)


P3 defines the lowest set value (non-temperature control setting)


P4 temperature correction

When the measured temperature deviates from the standard temperature, this function can be used to correct the corrected temperature = temperature before correction + correction value


P5 delay start time

When controlling the cooling of the compressor equipment, the delay time can be set as needed. When the controller outputs, the equipment will not start immediately, and it needs to start after the set delay time.


P6 high temperature alarm

When the measured value is greater than this value, the screen is displayed -- and the sound alarm is dropped. Simultaneously disconnect the output


P7 data lock function

Turn on the data lock to keep the current settings from being changed. At this time, the setting temperature and function are invalid. If you need to modify it, you need to turn off the data frequency function.


P8 factory reset

Long press SET to switch to P8, press SET to set to on, press RST to restore factory settings. You can also press and hold the + - button to disable the POST and restore to the factory settings


Wiring


Don't delay, buy today.


Add to cart now!

Reviews

Write a review

W2020 Temperature Controller Module (12 V, 10 A)

W2020 Temperature Controller Module (12 V, 10 A)

Features

  • intelligent control
  • precise temperature control
  • alarm function


See description for more details about the product.

Add to cart now!

Customers who bought this product also bought: