Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000003683
New product
The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5 V micro controller and your computer.
See description for more details about the product.
Add to cart now!
35 Item Items
Warning: Last items in stock!
Availability date:
1. Install the CP210x driver.
Before using the product, you need to install the CP2102 driver on your computer. The driver can be downloaded from this address. Usually, the driver must be installed on Windows or Mac OS X. Most Linux versions have this driver included.
2. Make the hardware connections.
Before making the hardware connections, turn off the expansion card and disconnect the converter from the PC. Also disconnect all sensors attached to the development board.
The converter is capable of feeding the development board to be programmed (max 500 mA). Connect the 3.3V pin to the development board power supply pin if it is running at 3.3V. Otherwise, connect the 5V pin to the power pin.
The remaining pins connect as follows:
Example of connecting to a 3.3V Arduino Pro Mini compatible development board.
3.Charge the code on the development board.
After connecting the converter to the development board, you can enter it into your computer and select the port by opening the Tools -> Port menu . Press the "Upload" button or the CTRL + Ushortcut to load the code on the development board. After the code has been written to the memory, you will receive a confirmation message that there are no problems. Otherwise, the upload is stopped and details about the problems will be displayed.
Raspberry Pi Coupe Case - Rainbow Compatible...
12,99 lei
This 3 mm infrared receiver is a high speed and...
3,44 lei
Miniature Ball Bearing (4 mm Internal Diameter)...
3,89 lei
Black LiPo Battery Strap (20 cm) See...
4,99 lei
Protection Cover Grid for 92 x 92 mm Cooler
1,99 lei
Soldering Paste for Soft Soldering 40 ml See...
6,99 lei
This module uses the 2.4ghz transceiver. It...
5,99 lei
This is a very efficient receiver for laser...
6,49 lei
RCA Cable - 1.5 m See description for more...
2,99 lei
Micro-USB Cable, 0.3 m See description for...
4,99 lei