Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method.
See description for more details about the product.
Add to cart now!
1 Item Items
Warning: Last items in stock!
Filament PET-G - a thermoplastic polymer from the group of polyesters in the f,orm of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is material friendly for beginners, the material available in covering and transparent colors.
|Diameter of filament||1.75 mm / 2.85 mm|
|Dimensional tolerance of filament||+/- 0.05 mm|
|Roundness of filament||+/- 0.02 mm|
|Surface of the material||High Gloss|
|Shrinkage of the material||Very low|
|Product weight||1.0 kg net, 1.36 kg gross|
|Spool - material||Transparent polycarbonate|
|Weight of the empty spool||~250 g|
|The diameter of the spool||200 mm|
|Width of spool||~70 mm|
|Diameter of mounting hole||52 mm|
|Package size||~205x205x80 mm|
|Cooling the printout||Optional|
Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally
PETG is a non-toxic, clear and durable printing...
Using Spectrum PLA Filament your 3D model will...
It includes the most common resistor values...
Arduino compatible development board with...
Board Compatible with Arduino Nano (ATmega328p...
Filament PLA - thermoplastic polyester in the...