PETG is a non-toxic, clear and durable printing material. It doesn't warp or contract during printing.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Filament PET-G - a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is material friendly for beginners, the material available in covering and transparent colors.
|Diameter of filament||1.75 mm / 2.85 mm|
|Dimensional tolerance of filament||+/- 0.05 mm|
|Roundness of filament||+/- 0.02 mm|
|Surface of the material||High Gloss|
|Shrinkage of the material||Very low|
|Product weight||1.0 kg net, 1.36 kg gross|
|Spool - material||Transparent polycarbonate|
|Weight of the empty spool||~250 g|
|The diameter of the spool||200 mm|
|Width of spool||~70 mm|
|Diameter of mounting hole||52 mm|
|Package size||~205x205x80 mm|
|Cooling the printout||Recommended|
Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally
The AMS1117-3.3 V voltage regulator module is...
ESP-01S ESP8266 Wireless Module
Wires Male-Male 10p 30cm
PETG is a non-toxic, clear and durable printing...
Colored 40p 2.54 mm Pitch Male Pin Header - Yellow
90° USB-A Female Connector
This sensor with 0.5m cable is for precision...
This is a 1W LED driver module with 350 mA PWM...
XH2.54 Connector Kit (560 pcs)
M4 Sliding T Nut for 20 mm V-Slot Profiles