Filament PLA - thermoplastic polyester in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber.
See description for more details about the product.
Add to cart now!
0 Item Items
This product is no longer in stock
Warning: Last items in stock!
Filament PLA - thermoplastic polyester in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PLA is a biodegradable material, produced from renewable natural resources. It is dedicated primarily to amateurs due to trouble-free use.
|Diameter of filament||1.75 mm / 2.85 mm|
|Dimensional tolerance of filament||+/- 0.05 mm|
|Roundness of filament||+/- 0.02 mm|
|Surface of the material||Gloss|
|Shrinkage of the material||Very low|
|Product weight||1.0 kg net, 1.36 kg gross|
|Spool - material||Transparent polycarbonate|
|Weight of the empty spool||~250 g|
|The diameter of the spool||200 mm|
|Width of spool||~70 mm|
|Diameter of mounting hole||52 mm|
|Package size||~205x205x80 mm|
|Cooling the printout||Recommended|
Due to the structural differences of printers, the above figures should be considered as guidelines and the corresponding values must be determined experimentally
The ESP8266 Wifi module is a low cost and...
100k Mono Potentiometer
Food-grade materials are environmentally...
This small synchronous switching step-down (or...
Neodymium Block Magnet 15x5x5 Thick N38 See...
The A4988 stepper motor driver is ideal for...
HC-06 Slave Module with Adapter (3.3V and 5V...
2500 mAh 18650 INR18650-25R 20 A Samsung Li-Ion...
FT5316M 15 kg * cm Servomotor with Metalic Reducer
USBasp is a low-cost programmer for AVR...