> >>BMP280 Barometric Pressure Sensor Module
BMP280 Barometric Pressure Sensor Module View larger
Previous Next

Imaginile sunt utilizate exclusiv cu titlu de prezentare. Fotografiile nu creează obligații contractuale.

BMP280 Barometric Pressure Sensor Module

0104110000016300

New product

Barometric pressure sensor module high precision at low cost, ideal for measuring weather or other similar projects. It can be used by both I2C and SPI through.


See description for more details about the product.

Add to cart now!

More details

38 Items

$2.04
tax incl.

Valid in the limit of the available stock

The price includes the costs for collection, treatment and ellimination of WEEE

Add to wishlist

More info

Overview

Barometric sensor is ideal for measuring various weather conditions.

This sensor has high accuracy and low cost making it an ideal solution for precision pressure measurements of up to ± 1 hPa and a temperature of up to ± 1.0oC. Because the pressure changes with altitude and pressure measurements are very accurate, you can use this sensor and the altimeter ± 1 meter accuracy.


Specifications

  • Power supply: 3 V to 5V
  • Communication: I2C or SPI
  • Pressure accuracy: ± 1 hPa
  • Temperature Accuracy: ± 1.0oC
  • Dimensions: 19.2mm x 17.9mm x 2.9mm / 0.8 "x 0.7" x 0.1 "
  • Weight: 1.3 g

Pin supply:

  • Vin- supply pin. Since the image using 3V DC, the board has a built-in voltage regulator that receives 3-5V DC and converts them to 3V. To use the module to be powered from the same voltage as the Arduino board.
  • 3Vo - this is the output from 3.3V regulator. It can provide up to 100mA
  • GND - Point Table

SPI pins:

All pins have level shift circuit to bring to a logical level 3 V to 5 V. Use any logical level is Vin pin.

  • SCK - SPI Clock pin, entry
  • SDO - Serial Data Out / Master In Slave Out pin, for sending data from the processor BMP183
  • SDI - Serial Data In / Master Out Slave In pin, for sending data from the processor to BMP183
  • CS - Chip Select pin, entry form, must be connected to "low" to start transmission SPI

To connect more BME280 the same microprocessor must use the same pin SDI, SDO and SCK.

I2C pin:

  • SCK - is also the I2C clock pin, pin connects to the microprocessor clock.
  • SDI - is also pin I2C time data terminal connects to the microprocessor

For more details check the attached datasheet.


Don't delay, buy today.


Add to cart now!

Reviews

Grade 
05/08/2020

Schimbati adresa I2C in libraria Adafruit

Foarte bun senzorul. Merge cu lbraria de la Adafruit, dar doar dupa ce schimbati adresa I2C din librarie. Urmati instructiunile de aici http://davidstein.cz/2017/09/30/arduino-bme280-could-not-find-a-valid-bme280-sensor-solved/

  • 2 out of 2 people found this review useful.
Grade 
06/01/2019

Adafruit BMP280

#define BMP280_ADDRESS (0x76)
#define BMP280_CHIPID (0x58)

bme.begin(BMP280_ADDRESS, BMP280_CHIPID)

  • 1 out of 2 people found this review useful.
Grade 
05/24/2018

Raspberry Pi 3B - Python 3

Senzorul functioneaza pe RPI 3b cu libraria BME280 de la Adafruit cu precizarea ca trebuia facuta modificarea spusa de George M si anume in fisierul "Adafruit_BME280.py" inlocuiti BME280_I2CADDR = 0x77 cu BME280_I2CADDR = 0x76.

  • 3 out of 3 people found this review useful.
Grade 
12/29/2017

Adafruit

Merge si cu libraria Adafruit dar cu ceva modificari. Le-am gasit aici: http://davidstein.cz/2017/09/30/arduino-bme280-could-not-find-a-valid-bme280-sensor-solved/

  • 4 out of 4 people found this review useful.
Grade 
09/27/2017

Cosmin

ATENȚIE! Placa nu are convertor de tensiune incorporat, așa cum este scris în specificațiile de pe site. Se alimentează la maxim 3,6 V și pentru a comunica pe I2C are nevoie de convertor de semnal de la 3.3 la 5 VCC.

  • 6 out of 7 people found this review useful.
Grade 
06/26/2017

Produs foarte bun.

Senzorul BMP280 GY este un senzor foarte bun dar si foarte usor de folosit.

  • 2 out of 2 people found this review useful.
Grade 
04/28/2017

Sparkfun,confirm si SPI

functioneaza ok si pe interfata SPI cu libraria sparkfun. Varianta asta BMP280 nu citeste si umiditatea, doar presiunea si temperatura. Pentru functii complete umi-termo-presiune alegeti BME280.Librariile sparkfun merg si pentru ea numai ca apelarea functiilor legate de umiditate intoarce un zero....

  • 1 out of 1 people found this review useful.
Grade 
03/29/2017

Sparkfun (nu Adafruit)

Nu pare sa functioneze cu libraria de la Adafruit, dar la mine a mers cu cea de la Sparkfun, I2C addr=76:
https://learn.sparkfun.com/tutorials/sparkfun-bme280-breakout-hookup-guide

  • 1 out of 2 people found this review useful.

Write your review!

Write a review

BMP280 Barometric Pressure Sensor Module

BMP280 Barometric Pressure Sensor Module

Barometric pressure sensor module high precision at low cost, ideal for measuring weather or other similar projects. It can be used by both I2C and SPI through.


See description for more details about the product.

Add to cart now!

Customers who bought this product also bought:

Download

BMP280 - datahseet

Download (1.42M)

Schema CJMCU BMP280

Download (135.51k)