Kit Pan/Tilt for the PiX CMY Sensor Camera

Description

• Pan/tilt mechanism for Pixy CMUcam5 Image Sensor (Not Included)
• Can use USB cable for power
• Fasteners and brackets included for easy installation
• Comes in a kit and requires some assembly
• This pan/tilt kit is not compatible with the Pixy CMUcam5 Image Sensor - LEGO

The Pan/Tilt Kit for Pixy CMUcam5 Image Sensor can be combined with Pixy CMUcam5 to make a fun demo, a good "hello world" for Pixy (no Arduino required). The Pixy pan/tilt mechanism comes in a kit and requires some assembly. There is no need of a battery to move the pan/tilt. The pan/tilt can use the USB cable for power but you must use a 4 ft or shorter cable. There are 3 two-threaded and 2 one-threaded brackets have been included in the kit.  This pan/tilt kit is not compatible with the Pixy CMUcam5 Image Sensor - LEGO .

There are lots of different types of fasteners included in this kit:

• 4-40 fastener long and short
• Tapping fastener long and short
• Servo horn fastener

Running the Pan/tilt Demo

There are three ways to run the pan/tilt demo:

• Running the demo by using the button press sequence
• Running the demo from PixyMon
• Running the demo from an Arduino

*Note: Pixy CMUcam5 Image Sensor Not Included.

Don't delay. Buy today.

Add to cart now!