The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
1 Item Items
Warning: Last items in stock!
This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
The D24V5Fx family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 36 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 93%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. These regulators have a power-save mode that activates at light loads and a low quiescent (no load) current draw, which make them well suited for low-power applications that are run from a battery.
The different versions of this regulator all look very similar, so the bottom silkscreen includes a blank space where you can add your own distinguishing marks or labels. This product page applies to all eight versions of the D24V5Fx family.
The regulators feature short-circuit/over-current protection, and thermal shutdown helps prevent damage from overheating. The boards do not have reverse-voltage protection.
Mini Screwdriver Set for Phone Repair
Plastic Hexagonal Nuts, Transparent, M3
Self-Locking Nylon Cable Ties,100 mm x 2.5 mm,...
M3x40 mm Hexagonal Head Screw
Neodymium Disc Magnet 6x3 Thick N38 See...
M3x20 mm Hexagonal Head Screw
PC4-M6 Pneumatic Straight Connector
PETG is a non-toxic, clear and durable printing...
M3 Butterfly Nut
This switching regulator uses the SEPIC...