Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
Viewed products
Olive Oil for Machines 65 ml See...
1 W Red LED Module See Description...
Waterproof 10k NTC Thermistor with 30...
10 kΩ NTC Thermistor with M4 Screw Hole (1 m Cable) See description for more details about the product. Add to cart now!
This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins. See description for more details about the product. Add to cart now!
SC16IS750 UART Module with I2C and SPI Interface
SN74LVC4245A 8 Channel Level Shifter Module
This device is a dual bidirectional I2C and SMBus voltage-level translator with an enable (EN) input and is operational from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2. See description for more details about the product. Add to cart now!
TV BOX MXQ PRO 4K - 2GB RAM - 8GB Storage
It has never been easier to turn a conventional TV into a smart one. It has 1GB of RAM and an internal memory of 8GB, thanks to which it is very fast. The Android operating system allows the installation of a huge range of applications. See description for more details about the product. Add to cart now!
Current output: 1.5 A Voltage input: 4.2 ~ 40 V Module size: 35.6 (mm) x16.8 (mm) See description for more details about the product. Add to cart now!
Aluminium Heatsink 35 x 12 x 30 mm
32 x17 x 30 mm Aluminum Radiator
140 X 40 X 20 mm Aluminum Radiator
35 x 12 x 5 mm Aluminum Radiator
35 x 12 x 40 mm Aluminum Radiator
40 x 80 x 12 mm Water Cooled Heatsink See description for more details about the product. Add to cart now!
KBPC5010 Full Bridge Rectifier (1000 V, 50 A)
Airspy R2 is an advanced open-source software defined radio receiver with adequate dynamic range, capable of sampling 10MHz of spectrum anywhere between 24MHz and 1.8GHz - and even beyond with extensions. See description for more details about the product. Add to cart now!
32-bit Processor running at 48MHz Eight relays with status LEDs and pluggable connectors Eight layer stackable Eight 12-bit A/D inputs Four 12-bit DAC outputs (0-10V dimmers) or Four open-drain outputs (30V/5.7A MOSFETs) Eight optically isolated digital inputs 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new) On-board hardware watchdog On-board...
Two ADS1248 24 bit delta-sigma converters (four channels each) Factory accuracy: 0.1% Maximum accuracy (through calibration): 0.01% Pluggable connectors On-board hardware watchdog On-board resettable fuse Eight Level Stackable Command line, Python drivers Node-Red code examples Optional -50oC to 450oC PT100 thermocouples See description for...
Routes all 40 I/O and power pins to pluggable terminal blocks Easy and secure field installation and debugging 150 mils Pitch Heavy Duty Pluggable Terminal Block Connectors Terminals rated voltage: 300V Terminals rated current: 8A Wire range: 24 - 14 AWG Brass standoffs, screws and nuts included See description for more details about the product....
Routes all 40 I/O and power pins to screw terminal blocks Permits easy and secure field installation Prototype area for your custom projects 2.54mm Pitch PCB screw Terminal Block Connectors Rated voltage: 300V Rated current: 10A Wire range: 24 - 18 AWG See description for more details about the product. Add to cart now!
3.5mm Pitch PCB Spring-loaded Terminal Block Connectors Stainless steel wire guard Phosphor bronze, tin plated pin header Rated Voltage: 300V Rated Current: 5A Contact Resistance: 20 mOhms Insulation Resistance: 5000 MOhms/DC 1000V Wire Range: 22-18 AWG Strip Length: 8-9 mm See description for more details about the product. Add to cart now!
Eight jumper selectable Universal Inputs 1K or 10K thermistors 0-10V analog inputs Dry contact/counter inputs Four AC Triac Outputs, 0.5A/500V Four 0-10V Outputs 24VAC Power Supply Four General Purpose LEDs RS485 In and Out ports Real Time Clock with Battery Backup Pluggable Connectors Hardware Watchdog Status LEDs on all Digital Inputs...
Four Optically Isolated Digital Inputs with status LEDs Four 0 - 10V or 0 - ±10V Analog Inputs Four Optically Isolated 4-20mA Inputs Four Optically Isolated Open Drain Outputs, 24V/4A Four 0-10V Analog Outputs Four 4-20mA Analog Outputs Four General Purpose LEDs TVS Protection on all Inputs RS485 and CAN Ports 24VDC Power Supply On Board...
A must for all RPI mission critical installation Cycle RPI power after software lock-up Prevent SD Card damage during power outages Run for hours on Li-Ion 18650 battery On board battery charger, step-up converter and intelligent power monitor Dual power supply jacks: micro USB and barrel Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion...
Eight MOSFETs with Status LEDs Pluggable Connectors 4 High Current Loads, 10A/24VDC 4 High Voltage Loads, 2A/240VDC Software self-test Command Line and Python Drivers See description for more details about the product. Add to cart now!
Eight RELAYS with Status LEDs Eight layer stackable to 64 relays Heavy Duty Pluggable Terminal Blocks 4 Relays with NO and NC Contacts, rated 4A/120VAC or 4A/24VDC 4 Relays with NO only Contacts rated 8A/48VAC or 8A/24VDC Software self-test Command Line and Python Drivers See description for more details about the product. Add to cart now!
Four RELAYS with Status LEDs Eight layer stackable to 32 relays Heavy Duty Pluggable Terminal Blocks NO and NC contacts on all relays Switch loads of up to 10A and 240V Software self-test Command Line and Python Drivers See description for more details about the product. Add to cart now!
Installs Raspberry Pi perpendicular to DIN-Rail Works for all versions from Zero to 4 Custom steel plate assures mechanical stability All required hardware included See description for more details about the product. Add to cart now!
Installs Raspberry Pi parallel to DIN-Rail Works for all versions of Pi from Zero to 4 Adapter plate pattern permits 90% rotation All required hardware included See description for more details about the product. Add to cart now!
The Kitronik Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor moisture present in soil. See description for more details about the product. Add to cart now!
Infrared (IR) break-beam sensors are a simple way to detect motion. See description for more details about the product. Add to cart now!
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. See description for more details about the product. Add to cart now!
YOUR SWITCH IS MY COMMAND See description for more details about the product. Add to cart now!
Remote Controlled Socket Set See description for more details about the product. Add to cart now!
Roll 4 Sockets 20 m HQ See description for more details about the product. Add to cart now!
Cable Ties Color Blue 100 Pcs See description for more details about the product. Add to cart now!
Cable Ties Color Yellow 100 Pcs See description for more details about the product. Add to cart now!
Cable Ties UV Protection ETS 100 Pcs See description for more details about the product. Add to cart now!
Cable Ties UV Protection ETS 100 Pcs See description for more details about the product. Add to cart now!
Cable Ties UV Protection ETS 100 Pcs See description for more details about the product. Add to cart now!
Plastic Green Cable Ties See description for more details about the product. Add to cart now!