Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
All Products
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
All Products There are 8375 products.
-
V-Slot Aluminium Profile
V-Slot Aluminium Profile 2 x 2 x 150 cm Weight: 666.5 g
59,99 leiOut of stock -
ACS724 Current Sensor Carrier 0 to 30A
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
39,99 leiOut of stock -
V-Slot Black Aluminium Profile 7.5 cm
V-Slot Black Aluminium Profile 7.5 cm See description for more details about the product. Add to cart now!
3,79 leiOut of stock -
ACS709 Current Sensor (from -75 A to + 75 A)
This board is a simple carrier of Allegro’s ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation up to 2.1 kV RMS. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes...
99,99 leiOut of stock -
-
Autoleveling Sensor for Tarantula 3D Printer
Autoleveling Sensor for Tarantula 3D Printer See description for more details about the product. Add to cart now!
99,00 leiOut of stock -
DYS ESC USB Linker ESC Programmer
DYS ESC USB Linker ESC Programmer See description for more details about the product. Add to cart now!
44,99 leiOut of stock -
USB ICSP PIC Programmer
USB ICSP PIC Programmer See description for more details about the product. Add to cart now!
89,00 leiOut of stock -
MPL115A2 - I2C Barometric Pressure/Temperature Sensor
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. See description for more details about the product. Add to cart now!
38,95 leiOut of stock -
0.2MPa Stainless Steel Pressure Transducer Sensor
Operating Voltage: 5V Output Voltage: 0.5~4.5V Accuracy: 1% FS Thread Size: G 1/4" See description for more details about the product. Add to cart now!
79,99 leiOut of stock -
Afro ESC USB Programming Tool
With this programmer you can load the firmware on the Afro ESC by connecting directly to it. See description for more details about the product. Add to cart now!
69,99 leiOut of stock -
1.2MPa Stainless Steel Pressure Transducer Sensor
Adopts Precision Compensation Technology High Accuracy Sensor Suitable For Gas,Liquid,Oil Stainless Steel Body See description for more details about the product. Add to cart now!
99,00 leiOut of stock -
-
-
AVR USBASP Programmer with Silver Case
AVR USBASP Programmer with Silver Case
29,95 leiOut of stock -
USBASP AVR Programmer
10 Review(s)USBasp is a low-cost programmer for AVR microcontrollers. It uses a pure software implementation of the USB communication protocol and it can be easily used with laptops. See Description for more details about the product. Add to cart now!
14,99 leiOut of stock -
Non-invasive AC Current Sensor SCT-013 (30A max)
Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor See description for more details about the product. Add to cart now!
55,00 leiOut of stock -
ACHS-7121 Current Sensor Carrier -10A to +10A
This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 10 A and outputs a proportional analog voltage (185 mV/A) centered at 2.5...
44,99 leiOut of stock -
-
-
-
ACHS-7123 Current Sensor Carrier -30A to +30A
This board is a simple carrier of Broadcom’s bidirectional ±30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 30 A and outputs a proportional analog voltage (66 mV/A) centered at 2.5 V...
29,99 leiOut of stock -
ACHS-7122 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered at 2.5...
29,99 leiOut of stock -
ACHS-7124 Current Sensor Carrier -40A to +40A
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 40 A and outputs a proportional analog voltage (50 mV/A) centered at 2.5 V...
29,99 leiOut of stock -
ACHS-7125 Current Sensor Carrier -50A to +50A
This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 50 A and outputs a proportional analog voltage (40 mV/A) centered at 2.5 V...
29,99 leiOut of stock -
9V, 5A Step-Down Voltage Regulator D36V50F9
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 9 V. The board measures only 1" x 1" yet delivers typical maximum continuous output currents between 2.7 A and 7 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional...
99,99 leiOut of stock -
IMU 9-DOF CJMCU BNO055 Orientation Sensor
IMU 9-DOF CJMCU BNO055 Orientation Sensor
99,99 leiOut of stock -
Proxxon 27116 - Milling cutters, 3 pcs. (1-2-3mm)
Solid carbide end mill cutter set. With two spiral grooves and fishtail polished section (cut to the centre). Enables lowering into undrilled workpieces. For cast iron, malleable cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece per size 1-2 and 3mm. Shaft diameter 3mm. See description for more details about the...
124,89 leiOut of stock -
Makey Makey Board
Do you want to play piano? Replace the keyboard from the computer you can connect Makey Makey Plate to anything and the fun can start. Connect the cables to some bananas and use them as piano keys. See description for more details about the product. Add to cart now!
199,00 leiOut of stock -
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040 Attention: the micro USB cable from the photos is not included!
79,99 leiOut of stock -
-
WS2812 LilyPad RGB Pixel Board
This RGB pixel board features WS1282 RGB LED with a built-in WS2811 built in right into the LED. See description for more details about the product. Add to cart now!
9,99 leiOut of stock -
Iteadmaple Microcontroller Leaf Maple Board with Cortex M3 STM32 For Arduino
Iteadmaple is a microcontroller board based on Leaf Maple. The Iteadmaple can achieve the maximum 72 MHz, it has 39 digital input/output pins, 16 analog inputs, native full speed USB, 3 USARTs, integrated SPI/I2C support. See description for more details about the product. Add to cart now!
59,00 leiOut of stock -
Adafruit GEMMA M0 - Miniature Wearable Electronic Platform
The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the size of a quarter, with friendly alligator-clip sew pads. See description for more details about the product. Add to cart now!
56,99 leiOut of stock -
IR Break Beam Sensor - 5mm LEDs
Infrared (IR) break-beam sensors are a simple way to detect motion. See description for more details about the product. Add to cart now!
54,99 leiOut of stock -
Contact-Less Infrared Thermopile Sensor Breakout - TMP007
This breakout has a really cool IR sensor from TI that can measure the temperature of an object without touching it! See description for more details about the product. Add to cart now!
74,99 leiOut of stock -
16 Servo Driver Board for the BBC micro:bit
Take your robotics project to the next level and control 16 servos with the Kitronik I2C Servo Driver Board for the BBC micro:bit. See description for more details about the product. Add to cart now!
89,99 leiOut of stock -
35x10 mm metal fixing plate blunt-ended
35x10 mm metal fixing plate blunt-ended
1,69 leiOut of stock -
QTR-HD-05A Reflectance Sensor Array: 5-Channel, 4mm Pitch, Analog Output
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
24,99 leiOut of stock -
Driver for the 4th Axis Block for the Miniature CNC
Driver for the 4th Axis Block for the Miniature CNC
59,99 leiOut of stock -
Rectangular metal fixing plate 55x10 mm
Rectangular metal fixing plate 55x10 mm
1,99 leiOut of stock -
Rectangular metal fixing plate 35x10 mm
Rectangular metal fixing plate 35x10 mm
1,89 leiOut of stock -
QTR-HD-09A Reflectance Sensor Array: 9-Channel, 4mm Pitch, Analog Output
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
39,99 leiOut of stock -
QTR-HD-09RC Reflectance Sensor Array: 9-Channel, 4mm Pitch, RC Output
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
29,99 leiOut of stock -
Power Distribution Board for Quadcopter w/ 12V & 5V BEC
Power Distribution Board for Quadcopter w/ 12V & 5V BEC
49,99 leiOut of stock -
QTR-HD-11A Reflectance Sensor Array: 11-Channel, 4mm Pitch, Analog Output
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
39,99 leiOut of stock -
QTR-HD-11RC Reflectance Sensor Array: 11-Channel, 4mm Pitch, RC Output
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage and separate controls for the odd and even emitters. In general, the closer the object, the higher the contrast between light...
39,99 leiOut of stock -
QTR-MD-02RC Reflectance Sensor Array
This array of IR LED/phototransistor pairs is great for precisely identifying changes in reflectance (like line detection). It operates from 2.9 V to 5.5 V and offers dimmable brightness control independent of the supply voltage. In general, the closer the object, the higher the contrast between light and dark readings, but high-reflectance objects are...
9,99 leiOut of stock
