Manufacturers
g4001 Speaker (8 ohm, 10 cm) See description for more details about the product. Add to cart now!
13 cm 4 Ohm Speaker See description for more details about the product. Add to cart now!
A uniquely square, high-resolution, high-speed, 4.0" display with optional touchscreen for Raspberry Pi – it's hip to be square! See Description for more details about the product. Add to cart now!
An H-bridge DC motor driver with configurable current limit (0.2 or 1A) and up to four different I2C addresses. Great for DIY robot builds. See description for more details about the product. Add to cart now!
This LED driver with constant current (up to 3 A) is used to control LED's or groups of LED's, without requiring resistors or current limiting devices. See description for more details about the product. Add to cart now!
This module can control LED lamps or bulbs. The lamp brightness can be adjusted using capacitive touch sensor. See description for more details about the product. Add to cart now!
This module is perfect for applications such as smart cars, toy cars, robots with 2.2 V to 10 V input voltage. See description for more details about the product. Add to cart now!
MDD10A is the dual-channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. See description for more details about the product. Add to cart now!
The AMIS-30543 stepper motor driver carrier is a Pololu carrier for ON Semiconductor's AMIS-30543 micro-stepping motor driver, which is a high-performance stepper motor driver with advanced features not found on our other stepper motor driver carriers. See description for more details about the product. Add to cart now!
TMC2208 Stepper Motor Driver See description for more details about the product. Add to cart now!
Maximum current: 7.2A, resolution: 0.1A Subdivision range: 400~25600ppr Impulse response frequency: 200KHz DC power supply The input voltage range: 24~80VDC or AC both OK Power supply is greater than 200W. Recommend 48VDC or 48V AC Operating Temperature: -10oC~45oC See description for more details about the product. Add to cart now!
Maximum current: 2A per phase (continuous, with cooling), 2.8A peak per phase Works with 3.3V and 5V signals Comes with heatsink for better cooling Has StealthChop technology for quieter stepper motors Has SpreadCycl technology for smoother movements See description for more details about the product. Add to cart now!
This product is an expansion board for Raspberry Pi containing two MC33886 high current motors. Each of them is a H bridge that can control both a brushed motor in both directions and a stepper motor. See description for more details about the product. Add to cart now!
This Servo:Lite board for the BBC micro:bit can form the control hub for your robotics project, control up top three servos & it has 5 x RGB ZIP LEDs on board.It is connected to the micro:bit using five bolts. See description for more details about the product. Add to cart now!
Haptic feedback can add a more professional level of interaction to your project. The same satisfying vibration you get when you receive a text message, phone call, or install a new app can be brought to your project using the Zio Haptic Motor Board. See description for more details about the product. Add to cart now!
Operating Voltage: 3 -14VDC Operating Current: 5A (max) Compatible With Arduino and Raspberry Pi Heavy-Duty Screw Terminal for supply Can be connected directly to the output of 433MHz receiver See description for more details about the product. Add to cart now!
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2...
Input Current: 1~5A Supply Voltage: 12 to 48VDC Output Current: 0.2~5.0A Power (MAX): 160W Temperature: -10~45℃ H bridge bipolar constant current drive. See description for more details about the product. Add to cart now!
Brushed motor is the most widely used motor because it is easy to use. See description for more details about the product. Add to cart now!
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 V to 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 V to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection,...
The X250 Alien is a great looking, agile, lightweight racer. Super easy setup that will have you flying straight out of the box. See description for more details about the product. Add to cart now!
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. See description for more details about the product. Add to cart now!
Dron a quadcopter The Quanum Venture FPV offers very good visibility to the room and the equipment is separated to minimize interference. It is one of the best-built FPV drones. See description for more details about the product. Add to cart now!
USB External DVD-ROM Drive
Development Board Compatible with Arduino DUE R3
Development Board Compatible with Arduiono DUE R3 + Cable
Development Board Compatible with Arduino DUE R3 and 50 cm Cable
3D Printer Nozzle 1/1.75 mm v6
Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. See Description for more details about the product. Don't delay, buy today. Add to cart now!
Development with the PIC18F K42 product family has never been easier! This Xpress board grants full access to a family of MCUs with a rich set of core independent peripherals, large Flash/RAM/EEPROM memories and a host of low power features that easily and rapidly enable a complex set of functions required by many of today's embedded control applications....
It is easy to use and to get started all you need to do is insert your wireless receiver into 1 of your USB ports to ensure that the receiver is recognized by your computer and then you are ready to go. See description for more details about the product. Add to cart now!
The BLE (Bluetooth Low Energy) Expansion for Omega is a USB-based expansion that adds Bluetooth 4.1 connectivity to your Omega so that it can interact with other Bluetooth-enabled devices. See description for more details about the product. Add to cart now!
The :GAME ZIP 64 is the ultimate retro handheld gaming platform for the micro:bit. It's got everything; a screen, programmable buttons, haptic feedback and more. See description for more details about the product. Add to cart now!
Aluminium Bench Fixture with Griper Nuts See description for more details about the product. Add to cart now!
Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for your phone or tablet that needs to talk to existing BLE hardware, but you don't know how it works beneath the surface? We have the perfect tool...
6S Hobbyking Lipo Cell Checker See description for more details about the product. Add to cart now!
This metal gripper is used to hold tight components of your project. It will help you put the metal together. See description for more details about the product. Add to cart now!
Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! See description for more details about the product. Add to cart now!
Ka-thunk* Pin down that little PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! See description for more details about the product. Add to cart now!
*Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! See description for more details about the product. Add to cart now!
Battery Charging Level Checker Device See description for more details about the product. Add to cart now!
This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. It has a wide operating voltage range of 10 V to 47 V and can deliver a continuous 1.7 A to each motor...
We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehicle), mobile robot and combat robot. See description for more details about the product. Add to cart now!
DRV8833 Motor Driver Module See description for more details about the product. Add to cart now!
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board...
A dual motor driver capable of supplying currents up to 5 A for each channel, bearing the tension between 5 V and 40 V. See description for more details about the product. Add to cart now!