Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
Manufacturers
HDglass is a high-performance...
This board is a 3-channel time-of-flight proximity and distance sensor module based on the OPT3101 IC from Texas Instruments. It emits infrared light in one of three selectable directions with its six integrated LEDs and measures distance by measuring the time delay of the reflected signal. Distance measurements can be read through a digital I2C...
VL53L3CX Time-of-Flight Multi-Target Distance Sensor Carrier with Voltage Regulator, 300cm Max
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20") away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1"...
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. See description for more details about the product. Add to cart now!
Meet UL, CE requirements Ultra-thin, ultra-small Input Voltage Range(V): 100 ~ 240 Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test See description for more details about the product. Add to cart now!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 34.014:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 1632.67 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm...
JGA25-370 (6V, 620 rpm) Gearmotor See description for more details about the product. Add to cart now!
This powerful boost regulator efficiently generates an output voltage of 9 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A. See description for more details about the product. Add to cart now!
5x7 mm Miniature DC Motor (20000 RPM at 3 V) See description for more details about the product. Add to cart now!
180PH-3048 Miniature DC Motor (10500 RPM at 3 V)
This is the breakout board for the fully integrated hall effect based linear current sensor ACS756.
This breakout board will solve all your power-monitoring problems. See description for more details about the product. Add to cart now!
This powerful boost regulator efficiently boosts input voltages as low as 2.9 V to a higher, adjustable output voltage between 9 V and 30 V while allowing an input current as high as 5 A. See description for more details about the product. Add to cart now!
Original product HQ CAMERA NOT INCLUDED! SOLD SEPARATELY!
This DC Motor with Speed Encoder Disk is a new 130 motor, double shaft, long axis and it comes with a code wheel. It can also use in soldering iron on direct welding wire. See description for more details about the product. Add to cart now!
High Torque DC Motor (3400 RPM at 24 V)
Miniature Coreless DC Motor (24500 RPM at 12 V)
This switched mode power supply offers a maximum load of 2.5 A with a power of up to 60 W. Offers 12 V, 2.5 A output (230 V power supply). See description for more details about the product. Add to cart now!
This 8520 DC motor has 47000 RPM speed at a low voltage of 3.7 V. Typically used for quadcopters and other similar toy aircrafts. See description for more details about the product. Add to cart now!
Biaxial DC Motor (17800 RPM at 24 V)
455-17150 DC Motor (4300 RPM at 24 V)
This powerful boost regulator efficiently generates an output voltage of 6 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A. See description for more details about the product. Add to cart now!
This powerful boost regulator efficiently generates an output voltage of 5 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A. See description for more details about the product. Add to cart now!
Quanum has been renowned for their revolutionary goggles and the Cyclops Diversity DVR Goggles continues this revolution with Pure Diversity. This means that it has not one but two receivers to get the best video signal for the clearest vision. See description for more details about the product. Add to cart now!
230 VAC Motor with Gear See description for more details about the product. Add to cart now!
6 V Outrunner Brushless DC Motor with Integrated Driver See description for more details about the product. Add to cart now!
RK-370-16300 Brushless DC Motor (6100 RPM at 12V)
RS-385 Electric Motor (10000 RPM at 12 V)
Sound Sensor See description for more details about the product. Add to cart now!
The compact (0.32"x0.515") U3V12F5 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 5 V. The pins have a 0.1" spacing, making this board compatible with standard solderless breadboards and perfboards. See description for more details about the product. Add to cart now!
This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, moisture-proof and anti-rust with the high-quality stainless steel tube encapsulated. No other components, unique single bus interface. See description for more details about the product. Add to cart now!
This DS18B20 temperature sensor (TO-92) is very useful for temperature control in consumer products, industrial systems, and in many thermal measurement systems. See Description for more details about the product. Add to cart now!
It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accuracy of ±1.5oC (best case). See description for more details...
Adjustable source, with color display, output voltage up to 30V and accuracy of 0.5%.See description for more details about the product. Add to cart now!
Nylon Cable Ties 100mm 2.5mm Width Bag of 100 pcs See description for more details about the product. Add to cart now!
CNC Spindle Motor 400 W with ER11 Chuck (3.175 mm) and Holder (12 - 48 V)
The S7V8F3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V output from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage....
JGB37-520 Gearmotor with Encoder and Wheel (6 V, 160 RPM) See description for more details about the product. Add to cart now!
JGB37-520 Gearmotor with Encoder and Wheel (12 V, 36 RPM)
JGB37-520 Gearmotor with Encoder and Wheel (12 V, 320 RPM)
The engine with reducer, encoder and wheel is ideal for the construction of radio-controlled cars because they have a long life span and torque.
Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular cases. See description for more details about the product. Add to cart now!
2.1V to 3.6V Supply Voltage Low power consumption – 0.15uA typical I2C interface Resolution: 0.04%RH, 0.02°C Accuracy: ±2%RH, ±3°C See description for more details about the product. Add to cart now!
Rated voltage: DC 12 V No-load current: 50 mA Blocking current: 1 A See description for more details about the product. Add to cart now!
JGA25-370 (6V, 77 rpm) Gearmotor See description for more details about the product. Add to cart now!
JGA25-370 (6V, 646 rpm) Gearmotor See description for more details about the product. Add to cart now!
JGB37-520 Gearmotor with Encoder and Wheel (6 V, 18 RPM)
AM2320 Temperature and Humidity Sensor