Multistar Elite 2204-2300KV Multi-Rotor Motor 3-4S (CW Prop Adapter)

Description

The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficiency/power to be optimized.

Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art

The Elite 2204~2300kv is a precision little gem of a motor designed for the mini range of multi-rotors and optimized for a 5inch prop, perfect for those tighter frames where 5inch props is the maximum. The 2204 has a removable/replaceable knurled prop shaft for those occasional crashes, lol.. And is available in CW/CCW flavors with matching bullet hardware. The lower motor frame is chamfered for easy fitment on tighter frames and has plenty of height for mounting hardware to winding clearance.

Multistar Elite is unmatched in quality and value, and the performance speaks for its self.

Features

• Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or better balancing
• Perfect laydown windings
• 100% QC
• Replaceable CW/CCW prop adapter

Specifications

• KV(RPM/V): 2300KV
• Lipo cells:  3~4s
• Max current: 126.5w
• Max Amps: 11.5A
• No Load Current: 0.6A/10V
• Internal Resistance: 0.125 ohm 
• Number of Poles:  12/14
• Dimensions(Dia.xL): 22x4 mm
• Motor Shaft: 3mm 
• prop shaft: 5mm CW prop adapter 
• Weight: 24g
• bolt hole spacing: 16*19 M3
• Lamination thickness: .2mm
• Magnets: N45SH
• Balancing spec: .005g
• Wire: 180deg oxygen free
• Connector: 2mm bullet

Prop Data

Battery   Prop      Throttle   Thrust   Amps
11.1v     5x3        50%        224g     3.7A,       
11.1v     5x3        100%      371g     7.5A 
7.4v       5x2        50%        120g     2.2A
7.4v       5x2        100%      200g     4.3A

Battery   Prop      Throttle   Thrust   Amps
11.1       5x3x3    50%        232g     4.7A
11.1       5x3x3    100%      392g     9.9A 
7.4         5x3x3    50%        134g     2.7A
7.4         5x3x3    100%      211g     6.7A 

Battery   Prop      Throttle   Thrust   Amps
11.1       6x4        50%        385g     7.5A
11.1       6x4        100%      591g     9.9A 
7.4         6x4        50%        134g     4.8A
7.4         6x4        100%      211g     9.7A

*Note: Some ESC may have sync issue if you are not running the latest software (SimonK or BLheli), Please make sure you update and configure your esc for this type of motor.

Don't delay. Buy today.

Add to cart now!