Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 9:00 - 18:00, pauza 13:00 - 14:00.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Motor Drivers
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
-
FormFutura Premium PLA Filament - Atomic Green, 2.85 mm, 1000 g
Premium PLA is a high-end...
$26.16 $39.28
Viewed products
-
Black Widow 2206...
Brushless Black Widow 2205 2000KV...
-
BA5406 - Dual...
BA5406 - Dual Amplifier 2 x 5 W, 12 V
Motor Drivers There are 123 products.
-
-
Adafruit Motor/Stepper/Servo Shield for Arduino v2
The original Adafruit Motor shield kit is one of our most beloved kits, which is why we decided to make something even better. See description for more details about the product. Add to cart now!
$32.40Out of stock -
Pololu DRV8835 Dual Motor Driver Shield for Arduino
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The shield can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A...
$21.60Out of stock -
Step By Step 28BYJ048 5V Motor and ULN2003 Driver (Green)
The driver is based on an integrated ULN2003 circuit that contains several Darlington configurations. It works at very good parameters along with the stepper motor in the kit. See description for more details about the product. Add to cart now!
$4.29Out of stock -
Romeo BLE mini - Arduino with Driver Motor and 4.0 Bluetooth
Romeo BLE mini is a simplified version of Romeo board. See description for more details about the product. Add to cart now!
$45.36Out of stock -
A4988 / DRV8825 Stepper Motor Driver Expansion Board
A4988 / DRV8825 Stepper Motor Driver Expansion Board See description for more details about the product. Add to cart now!
$4.80Out of stock -
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040 Attention: the micro USB cable from the photos is not included!
$19.20Out of stock -
5 Axis Stepper Motor Driver Board for MACH3 CNC (3 A)
The step-wise motor drive plate is useful for controlling up to 5 axes, being compatible with the MACH3 CNC. Separate power supply of connected peripherals to protect your computer from USB connection. See description for more details about the product. Add to cart now!
$9.36Out of stock -
Driver for the 4th Axis Block for the Miniature CNC
Driver for the 4th Axis Block for the Miniature CNC
$14.40Out of stock -
Pololu High-Power Stepper Motor Driver 36v4
This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can deliver up to 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling). The SPI interface allows configuration of the current limiting, step mode (9 step...
$39.36Out of stock -
24v12 Pololu Power Controller
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 40 V and is efficient enough...
$40.56 $47.76Out of stock -
Pololu 18v15 Power Controller
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to...
$40.56 $47.76Out of stock -
High-Power Simple Motor Controller G2 18v15
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output...
$119.76Out of stock -
High-Power Simple Motor Controller G2 18v15 (Connectors Soldered)
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output...
$40.56Out of stock -
High-Power Simple Motor Controller G2 18v25
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output currents up to 25 A without a...
$59.76Out of stock -
High-Power Simple Motor Controller G2 24v12
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output...
$46.80 $49.20Out of stock -
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output...
$40.56Out of stock -
Cytron 13A, 5-25 V Controller for Motor DC
The Cytron 13A, 5-30V Single DC Motor Controller is an enhanced version of the MD10B which is designed to drive high current brushed DC motor up to 13A continuously. See description for more details about the product. Add to cart now!
$21.36Out of stock -
Combat Robot Controller-Arduino Compatible
Combat Robot Controller-Arduino Compatible See description for more details about the product. Add to cart now!
$33.36 $42.96Out of stock -
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with...
$20.88Out of stock -
Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a Toshiba...
$38.16Out of stock -
Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and ships with soldered header pins and terminal blocks....
$38.16Out of stock -
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a...
$78.00Out of stock -
CCM5D Digital PWM DC Motor Speed Controller With Display
CCM5D Digital PWM DC Motor Speed Controller With Display See description for more details about the product. Add to cart now!
$7.20Out of stock -
30 A ESC for Brushless Motors with BEC (with Connectors)
ESC 30A Brushless motors for the BEC (banana connectors). See description for more details about the product. Add to cart now!
$9.60Out of stock -
ESC Afro Slim 20 Amp (Firmware SimonK)
The new Esc slim from Afro is the ideal choice for multirotor projects, offering 20A in a compact and performance package. See description for more details about the product. Add to cart now!
$19.20Out of stock -
Pololu VNH2SP30 Driver for DC Motor Carrier MD01B
This carrier board for ST’s VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 14 A (30 A peak). It works with 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback. Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current,...
$38.40 $40.80Out of stock -
Pololu G2 High-Power Motor Driver 24v13
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
$33.36Out of stock -
SmartElex 15S DC Motor Driver 15A (30A Peak)
QUICK OVERVIEW Supply Voltage: 6.8-30 VDC. Continuous Current: 15 Amp. PWM Frequency: 20 KHz. Max Peak current: 30 Amp (For 10 Seconds). One brushed DC motor Bidirectional control. See description for more details about the product. Add to cart now!
$12.85Out of stock -
Pololu G2 High-Power Motor Driver 24v21
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
$54.00 $61.20Out of stock -
Pololu G2 High-Power Motor Driver 18v17
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" x 0.8" board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along...
$25.58 $33.36Out of stock -
DRV8833 Motor Driver Module
DRV8833 Motor Driver Module See description for more details about the product. Add to cart now!
$4.80Out of stock -
DRV8833 Dual Motor Driver Carrier
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage...
$18.00Out of stock -
Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board...
$12.00Out of stock -
MC33886 Dual Motor Driver
A dual motor driver capable of supplying currents up to 5 A for each channel, bearing the tension between 5 V and 40 V. See description for more details about the product. Add to cart now!
$15.60Out of stock -
Dual MC33926 Engine Driver for Raspberry Pi (Disassembled)
This add-on board enables a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. See description for more details about the product. Add to cart now!
$40.80Out of stock -
Dual Pololu DRV8835 Engine Driver
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage,...
$14.40Out of stock -
A4988 Stepper Motor Driver Carrier, Black Edition
1 Review(s)This engine driver is built with four PCBs and delivers 20% more power than the classic (two-layer) version. Applies to voltages between 8 V and 35 V and delivers a 1.2 A current that can reach, with cooling, up to a maximum of 2 A. See description for more details about the product. Add to cart now!
$8.18Out of stock -
L9110 Dual Motor Driver
L9110 Dual Motor Driver See description for more details about the product. Add to cart now!
$3.11Out of stock -
BTS7960 43 A Motor Driver
This motor driver is based on BTS7960 which is ideal for driving powerful engines and capable of delivering currents up to 43 A. See description for more details about the product. Add to cart now!
$9.60Out of stock -
Cytron 13Amp DC Motor Driver
Cytron 13Amp DC Motor Driver See description for more details about the product. Add to cart now!
$15.60Out of stock -
Cytron SmartDrive40
The Cytron SmartDrive40 40A DC Brushed Cytron Driver is designed to drive a brushed DC motor from a medium power motor to an engine with a capacity of up to 80A (peak) and 40A continuous. See description for more details about the product. Add to cart now!
$71.76Out of stock -
Cytron 30A DC Motor Driver
Cytron 30A DC Motor Driver See description for more details about the product. Add to cart now!
$47.76Out of stock -
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously...
$30.96Out of stock -
Pololu VNH5019 for DC Motor with Driver Carrier
This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage,...
$76.80Out of stock -
STSPIN220 Low-Voltage Stepper Motor Driver
This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too low for other drivers. It can deliver up to approximately 1.1 A per phase continuously without a heat sink or forced air...
$7.20Out of stock -
Miniature DC Motor Driver (2.2 - 10 V, 800 mA)
This module is perfect for applications such as smart cars, toy cars, robots with 2.2 V to 10 V input voltage. See description for more details about the product. Add to cart now!
$2.40Out of stock -
AMIS-30543 Stepper Motor Driver Carrier
The AMIS-30543 stepper motor driver carrier is a Pololu carrier for ON Semiconductor's AMIS-30543 micro-stepping motor driver, which is a high-performance stepper motor driver with advanced features not found on our other stepper motor driver carriers. See description for more details about the product. Add to cart now!
$18.00 $24.00Out of stock
