CBC-10 12V/24V Battery Auto Charger

Description

The charger is intelligent, controlled by a microprocessor - when fully charged it automatically switches off, going into voltage monitoring mode - 100% safe for each battery. 

The efficiency of our charger is comparable to the charging process in leading, professional devices (even many times more expensive) - using a smart charger does not affect the battery operation , on the contrary, extends its life! 

The charger is dedicated not only to high-capacity car batteries - thanks to the adjustment of the charging current, it is also suitable for gel, motorcycle, yacht and scooter batteries with less capacity.

Unlimited possibilities - our charger is equipped with a unique, disconnected cable with a SAE quick connector. This allows you to easily match the charger to your installation, when the attached cables with alligator clips and eye terminals are insufficient.

Additional SAE connectors are available separately

The paver uses pioneering solutions:

• automatic and reliable battery charge control - after reaching a certain voltage, or an automatic drop in the charging current,
• voltage monitoring after charging - automatic resumption of charging in the event of a voltage drop on the battery, also after a power outage from the AC network ,
• the charger eliminates the battery sulphation phenomenon, which may be generated during charging,
• maintenance mode for 12V / SLA batteries with a capacity of 14-230Ah - the charger gives a constant voltage of 13.6V with a current of up to 5A - keeps the battery in full operation - ideal for electric vehicles, forklifts, etc.
• 13.6V / 5A power supply mode - the ability to supply devices powered from 12V.
• "winter" mode - guarantees full and effective charging of the battery, even at low ambient temperatures
• "reactivation / resuscitation" mode - special charging mode - in the case of extremely discharged batteries, the charger uses a reduced charging current of 1.5A , until reaching a safe voltage allowing faster charging - the charger decides by itself to use this mode,
• disconnected cable equipped with SAE fast-connector, allows you to adapt the charger to your needs, standard equipment includes crocodile terminals and eye terminals ,
• charger equipped with a set of protection against short circuits, against incorrect polarity connection, against overheating, overloading, overloading, etc.

The CBC 10 charger is designed for 12V / 24V batteries of the gel type, lead-acid type, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid.Charging is automatic, depending on the mode even in 9 stages!Charging mode, operation of the charger is signaled by 13 LED diodes.

The first stage is the automatic detection of the battery type (12 / 24V) and its possible reactivation (only for heavily discharged cells) - charging with a reduced current.

The second stage is the basic charging - depending on the mode, charging current 10A / 5A / 2A (for 24V batteries, the maximum current is 5A).

Next stages, following stagesit is the control of the charging process - along with the increase of the voltage on the battery, the charging current changes: 10A-7.5A-5A-4A-3A-2A-1.5A.

At the final stage of charging, the current is limited to 1.5A - it is an excellent protection against the phenomenon of "gassing" of the battery.After reaching 14.4V (for aku 12V) and 28.8V (for aku 24V), charging is completed. 

The last stage is the voltage monitoring phase on the battery - in the case of longer leaving the charger connected to the battery and a voltage drop to 12.8V (12V) / 25.6V (24V), the charger activates 1.5A maintenance charge to prevent the battery from discharging.

Don't delay, buy today.

Add to cart now!