Dupa plasarea solicitării de comandă, in sectiunea Istoric puteti vedea cate solicitări de comandă mai avem de procesat inaintea dumneavoastra
Program de lucru: Luni - Vineri 8:30 - 17:30, pauza 12:30 - 13:30.
Se efectueaza lucrari de mentenanta la site si pot aparea erori. In cazul in care intampinati erori va rugam sa reincercati mai tarziu.
Ridicarea personala este disponibila pentru comenzile achitate in avans. Se pot ridica dupa ce sunt pregatite.
No products
Categories
- Stock Clearance
- All Products
- Accesories
- GSM Accessories
- Aeromodels
- Adapters and Converters
- Test and Measurement
- Audio
- Batteries
- BBC Micro:Bit
- Cables
- Cameras
- Cases
- Computer parts
- Electronic Components
- Connectors
- Consumables
- Car Diagnosis
- Power Electronics
- Wires
- Flotilla
- Gadgets
- GPS
- 3D Printers
-
Filaments
- ABS Filaments
-
PLA Filaments
- Classic PLA Filaments
- EasyPrint PLA Filaments
- HD PLA Filaments
- Easy PLA Filaments
- Mineral PLA Filaments
- PLA PRO Filaments
- Ingeo 3D850 PLA Filaments
- Ingeo 3D870 PLA Filaments
- PHA / PLA Filaments
- Glitter PLA
- Premium PLA
- EasyFil PLA
- GalaxyPLA
- Volcano PLA
- Armour-D PLA
- Silk Gloss PLA
- Matt PLA
- ReForm rPLA
- MagicFil Thermo PLA
- PLA Special Filament
- High Speed PLA
- Chameleon PLA
- Nylon Filaments
- PETG Filaments
- ASA Filaments
- HIPS Filaments
- Lemn Filaments
- Metal Filaments
- Glossy Polymer Filaments
- Carbon Fiber Filaments
- PVA Filaments
- Flexible Filaments
- Other Filaments
- Coating Liquid
- Co-polyesters Filaments
- Composite Materials Filament
- STYX-12
- Thibra3D Skulpt
- Arnite® ID 3040
- Novamid® ID 1030 (PA6/66)
- Poliamide
- Magnets
- Mechanics
- Memories
- Motors
- Optoelectronics
-
Development Boards
-
Arduino Compatible Boards
- Compatibile with Arduino UNO
- Compatibile with Arduino MEGA
- Compatible with Arduino Nano
- Compatible with Arduino Pro Mini
- Compatible with Arduino Pro Micro
- Compatible with Arduino DUE
- Compatible with Arduino Leonardo
- Compatibile cu Arduino Zero
- Compatible with LilyPad
- Adafruit Feather
- Adafruit Trinket
- Others
- 8051 Boards
- ARM Boards
- AVR Boards
- ESP8266 Boards
- ESP32 Boards
- FPGA and CPLD Boards
- LoRa Boards
- MBED Boards
- ODROID Boards
- PIC Boards
- Bluetooth Boards
- GPS Boards
- GSM and GPRS Boards
- WiFi Boards
- Orange Pi
- Pycom Boards
- Others
-
Arduino Compatible Boards
- Programmers
- Prototyping
- Robotics
- Raspberry Pi Zero
- Raspberry Pi
- Sensors
- Surveillance Systems
- Arduino Shields
- Battery Holders
- Tools
- Wearables
- Wireless
- Others
- Kits
- Resealed
- Storage systems
- Flotilla modules
Manufacturers
Top sellers
-
UTP Flat Cable, CAT6, Red, 0.5 m
Ultra Flat CAT6 Ethernet Patch Cable are only a 1.1 mm thick that gives a plenty of ventilation room for network rack wiring. See description for more details about the product. Add to cart now!
$1.08Out of stock -
Maxbotix LV-MaxSonar-EZ0 Sonar Range Finder MB1000
This compact sonar range finder by Maxbotix detects objects from 0 to 6.45 m (21.2 ft) with a resolution of 2.5 cm (1") for distances beyond 15 cm (6"). Unlike other sonar range finders, the LV-MaxSonar has virtually no dead zone: it can detect even small objects up to and touching the front sensor face! See description for more details about the...
$31.63 $54.96Out of stock -
-
3.3V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F3S5CMA
The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The regulator also has a precision-adjustable low-voltage cutoff...
$21.12In Stock -
-
-
Adafruit Feather 32u4 Basic Proto
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. See description for more details about the product. Add to cart now!
$30.72Out of stock -
Battery Charger 18650 XTAR VC4
VC4 is a professional processor loader with three-stage charging process TC/CC/CV and LCD display. See Description for more details about the product. Add to cart now!
$35.76Out of stock -
STSPIN220 Low-Voltage Stepper Motor Driver
This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too low for other drivers. It can deliver up to approximately 1.1 A per phase continuously without a heat sink or forced air...
$7.20Out of stock -
-
Micro Transponder NFC/RFID - NTAG203 13.56MHz
This tiny micro NFC/RFID tag is super small and contains an NTAG203 chip plus antenna. See description for more details about the product. Add to cart now!
$3.84Out of stock -
Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822 (v2.0)
Bluefruit LE Friend card offers easy communication between your computer and your BLE (bluetooth low energy) phone or tablet using UART serial communication. See description for more details about the product. Add to cart now!
$40.56In Stock -
Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 (Mini Kit)
It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! See description for more details about the product. Add to cart now!
$70.22Out of stock -
-
3.3V, 3.6A Step-Down Voltage Regulator D36V28F3
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4.5 V to 50 V and efficiently reduces it to 3.3 V. The board measures only 0.7" x 0.8" yet delivers typical maximum continuous output currents between 3.2 A and 4.5 A, depending on the input voltage, which makes it well suited for powering moderate loads like...
$36.48Out of stock -
W1308 Temperature Controller Module with Red Display (Thermostat), 24 V Power Supply
Features Universal panel installation With data lock Wide temperature range Support control heating/cooling With high temperature alarm See description for more details about the product. Add to cart now!
$9.60Out of stock -
W1308 Temperature Controller Module with Blue Display (Thermostat), 24 V Power Supply
Features Universal panel installation With data lock Wide temperature range Support control heating/cooling With high temperature alarm See description for more details about the product. Add to cart now!
$10.68Out of stock -
Colorduino RGB LED Matrix Driver
This Colorduino RGB LED matrix driver is a special LED driver to control RGB LED arrays. See description for more details about the product. Add to cart now!
$9.36 $18.96Out of stock -
ACS724 Current Sensor Carrier -20A to +20A
This board is a simple carrier of Allegro’s bidirectional ±20A ACS724LLCTR-20AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A and outputs a proportional analog voltage (100 mV/A) centered...
$9.60Out of stock -
ACS724 Current Sensor Carrier 0 to 30A
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (133 mV/A) that measures 500 mV...
$9.60Out of stock -
11p 1.25 mm Single Head Cable (10 cm)
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
$0.36 $0.48In Stock -
11p 1.25 mm Double Head Cable (15 cm)
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
$0.55 $0.60In Stock -
Raspberry Pi Camera Cable - 75cm
Raspberry Pi Camera Cable - 75cm See description for more details about the product. Add to cart now!
$4.80Out of stock -
10p 1.25 mm Double Head Cable (30 cm)
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
$0.84 $1.32In Stock -
11p 1.25 mm Double Head Cable (30 cm)
• 1.0 1571-28 line: Each copper wire 0.12 temperature 80 degrees pressure 300V. • 1.25 1571-28 line 7 copper wire: Each copper wire 0.12 is resistant to temperature 80 degrees withstand voltage 300V. • 1.5 7th copper wire of 1007-28.: Each copper wire 0.12 is resistant to temperature 105 degrees withstand voltage 600V. See description for more details...
$0.96 $1.20In Stock -
Proximity E3D v6 3D Printer Head (0.5 mm Nozzle, 3 mm Filament)
Proximity E3D v6 3D Printer Head (0.5 mm Nozzle, 3 mm Filament) See description for more details about the product. Add to cart now!
$10.32In Stock -
-
1000:1 Micro Metal Gearmotor HPCB 6V
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. (Note: stall torque and current...
$38.16Out of stock -
Sakata 3D850 Refill PLA Filament - Blue 1.75 mm 700 g
REFILL-850 is our INGEO 850 packaged for the project of the universal spool "MASTER SPOOL" https://www.thingiverse.com/thing:2769823 You have to print your own spool support to put this Refill filament on! It does not come with it! SAKATA 3D PLA 850 filament is suitable for all consumer-grade 3D FDM/FFF printers. • High resolution, premium filament....
$13.20Out of stock -
-
Transparent Speaker Cable 2x2.5mm 25m
Transparent Speaker Cable 2x2.5mm 25m
$10.80 $12.00Out of stock -
-
Pololu Distance Sensor with Pulse Width Output, 50cm Max
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20") away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1"...
$13.68Out of stock -
Pololu Digital Distance Sensor 15cm
This small lidar-based distance sensor detects the presence objects within 15 cm (6"). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1" pin spacing makes it easy to use with standard solderless breadboards and 0.1" perfboards. See...
$12.00Out of stock -
Pololu Digital Distance Sensor 5cm
This small lidar-based distance sensor detects the presence of objects within 5 cm (2"). It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1" pin spacing makes it easy to use with standard solderless breadboards and 0.1" perfboards. See...
$12.72Out of stock -
Smart Watch GT08 - Gold
Smart Watch GT08 - Gold See description for more details about the product. Add to cart now!
$26.16Out of stock -
3D PETG Filament 1.75 mm 1 kg - Transparent
3D PETG Filament 1.75 mm 1 kg - Transparent
$21.60Out of stock -
-
-
-
20 W Red LED
Red LED with a power of 20 W useful for lighting in innovative projects. See description for more details about the product. Add to cart now!
$7.92In Stock -
80 W Constant Current LED Power Supply (220 V)
This product is a steady state LED power supply that can deliver up to 80W power. It is suitable for powering LEDs directly to the power supply. It can accept a wide range of input voltages, with a very good output and a power factor of at least 0.96. The module is useful for outdoor use, with the IP67 protection standard. See description for more...
$24.00In Stock -
RS-385 Electric Motor (10000 RPM at 12 V)
RS-385 Electric Motor (10000 RPM at 12 V)
$4.80Out of stock -
CMSIS-DAP JTAG Adapter for ARM
1 Review(s)CMSIS-DAP JTAG Adapter for ARM See description for more details about the product. Add to cart now!
$14.40Out of stock -
-
5630 Soft Warm White SMD LED Strip (3000 K, 12 V - 24 V)
5630 SMD LED bar with diffuse color temperature 3000 K 12 V - 24 V (Alba Calda shade, 5 m roll) useful for decorative lighting in hotels, shops, houses. See description for more details about the product. Add to cart now!
$8.40Out of stock -
GM12-15BYC Micro Gear Stepper Motor (1:298)
GM12-15BYC Micro Gear Stepper Motor (1:298) See description for more details about the product. Add to cart now!
$14.16In Stock -
LinkIt Smart 7688 with MT7688 (580 MHz, 128 MB RAM, WiFi) and ATmega32u4
LinkIt Smart 7688 is an open development board which is based on OpenWrt Linux distribution and MT7688. See description for more details about the product. Add to cart now!
$21.60Out of stock
