Raspberry Pi Camera Module 3

Raspberry Pi Camera Module 3 is a compact camera from Raspberry Pi. It offers an IMX708 12-megapixel sensor with HDR, and features phase detection autofocus. Camera Module 3 is available in standard and wide-angle variants, both of which are available
with or without an infrared cut filter.

Camera Module 3 can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. Its operation is fully supported by the libcamera library, including Camera Module 3’s rapid autofocus feature: this makes it
easy for beginners to use, while offering plenty for advanced users. Camera Module 3 is compatible with all Raspberry Pi computers that have a CSI connector (except Raspberry Pi 400 and the 2016 launch version of Zero). To use it with Raspberry Pi Zero/W/WH/2W you need an adapter cable which you can purchase separately (it also comes with the official case for Zero, but the camera can't be mounted in the case).

The PCB size and mounting holes remain the same as for Camera Module 2. The Z dimension differs: due to the improved optics, Camera Module 3 is several millimetres taller than Camera Module 2.

Specifications:

• Size: around 25 × 24 × 11.5 mm;
• Still resolution: 11.9 Megapixels;
• Video modes: 1080p50 / 720p100 / 640 x 480p120;
• Sensor: Sony IMX708;
• Sensor resolution: 4608 x 2592 pixels;
• Sensor image area: 6.45 x 3.63mm (7.4mm diagonal);
• Pixel size: 1.4 µm x 1.4 µm;
• Optical size: 1/2.43";
• Focus: motorized;
• Depth of Field: approx 10 cm to ∞;
• Focal length: 4.74 mm;
• Horizontal FoV: 66 degrees;
• Vertical FoV: 41 degrees;
• Focal ratio: F1.8;
• Maximum exposure time: 112 seconds;
• Lens mount: N/A.