Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
0104110000007353
New product
High gain audio amplifier based on the LM386 integrated circuit.
See Description for more details about the product.
Add to cart now!
257 Item Items
Warning: Last items in stock!
Availability date:
1. Power up the audio amplifier.
The module is powered with a voltage between 5 V and 12 V. The supply pins are marked with VCC and GND. On the module are marked 2 pins with GND, but it does not matter which pin you connect the table.
2. Connect a speaker to the mode.
On the opposite side of the module, there are two screw terminals useful for connecting a speaker with a 8Ω impedance.
3. Connect an audio signal source.
The audio input is made through the pins marked with IN and GND. If the audio signal and the power supply come from a common source (for example: an Arduino development board), you need to connect a single mesh wire (GND).
The module connects to the development board:
Wireless Audio Transmission Module BLE Mono...
14,99 lei
This DIP Switch (8p) has 8 pins, generally used...
4,01 lei
PH2.0 Socket 2p (10 pcs set) See description...
0,49 lei
The MT8870 module decodes DTMF signals from an...
29,99 lei
Dual-sided SOP8/SOIC8/SO8/TSSOP8/SSOP8 SMD to...
0,97 lei
Soldering Paste 40 g See description for more...
7,99 lei
This mounting bracket is suitable for your...
4,99 lei
Module with stabilizer 3.3 V. See description...
3,99 lei
RFID 125 kHz Blue Trinket
2,99 lei
Raspberry Pi Zero W + Case with Camera Adapter...
74,99 lei